Specification Sheet

,
CABINET
Stainless steel panels resist wear and corrosion
.
Durable satin finish helps hide water spots and
fingerprints.
COOLER TOP
Non-corrosive stainless steel cooler top, no.
300 series with satin finish resists stains and
corrosion and is easy to maintain. Anti-splash
ridge reduces splatter. Contoured to insure
proper drainage.
BUBBLER
Exclusive one-piece, chrome-plated two-
stream mound-building bubbler with
non-removable anti-squirt feature and integral
hood insures a satisfying drink of water.
PUSH BAR ACTUATION MECHANISM
Self-closing light-touch push bars on front and
sides with raised letters for the visually
impaired.
AUTOMATIC STREAM HEIGHT REGULATOR
Self-closing assembly is located inside unit to
prevent tampering. Unit resists corrosion and
liming. A constant stream height is automatically
maintained under line pressures that vary from
20 to 105 psi.
INLET STRAINER
Easily cleaned in-line strainer screen traps
particles of 140 microns or larger before they
enter the waterway.
TEMPERATURE CONTROL
Positive sensing thermostat for controlling
temperature of storage tank water. Factory
set at 50° F Adjustable ± 5° F.
STORAGE TANK
Non-pressurized stainless steel
evaporator/storage tank for long life.
Waterways are certified to NSF/ANSI 61,
far exceeding the requirements of the
Safe Drinking Water Act.
REFRIGERATION SYSTEM
High-efficiency, hermetically sealed, positive
lubricated fan cooled condenser. System
uses R134a refrigerant. Protected by Halsey
Taylor’s Limited 5 Year Warranty
VENTILATION
Insure proper ventilation by maintaining
6" (152mm) minimum clearance from the
cabinet louvers to wall.
SUGGESTED SPECIFICATIONS
Shall deliver 8.0 GPH of 50° F water at 90° F
ambient and 80° F inlet water. Shall have
stainless steel basin with removable drain
strainer. Bubbler shall be two-stream, mound
building type. Separate valve and automatic
stream regulator shall be mounted within
cabinet. Refrigeration system shall employ high
efficiency, positive start compressor using
R134A, non-pressurized tank with totally
encapsulated insulation and be controlled by
positive sensing thermostat. Shall have front
and side push-bar water controls with raised
lettering for the visually impaired. Cooler shall
comply with ANSI 117:1 and ADA for visual
and motion disabilities. The manufacturer shall
certify the unit to meet the requirements of
NSF/ANSI 61 & 372 and the Safe Drinking Water
Act. Unit complies with ARI Standard 1010.
NOTE: Continued product improvement
makes specifications subject to change
without notice. See Halsey Taylor website
for most current spec sheet.
HALSEY TAYLOR, 2222 CAMDEN COURT, OAK BROOK, ILLINOIS 60523
/ 7-2013
MODEL:
HACG8BLPV-WF
HACG8BLSS-WF
Barrier-Free Cooler
halseytaylor.com
HACG BARRIER-FREE SERIES
detaRgnippihS.L.FesaByticapaC HPGledoM
ttaWthgieWspmAetaR**F°05 ot delooC.oN
Ambient Air Temp
egasU.bl.paC
70°F 80°F 90°F
†
100°F
HACG8BL*-NF 062298.20.82.70.88.87.9
**With projector service and tap water at 80° F
†
UL listed and complies with ARI Standard 1010
Trap and service stop not included
JOB NAME:
ENGINEER/CONTRACTOR NAME:
APPROVAL:
DATE:
* Finish indicator: PV for Platinum Vinyl and SS for Stainless Steel cooler panels
start compressor with lifetime lubrication and
built-in overload protection, efficient capillary
sizing, large capacity dryer-strainer, and self-
Shall include high-efficiency refrigeration system.
High-Efficiency HAC Green
LEAD REDUCTION FILTER
Halsey Taylor Water Cooler With Filter is
equipped with the WaterSentry HWF172
system which is certified to ANSI/NSF 42 and
Features include Quick-Disconnect, 1/4 turn
installation. Automatic inlet shut-off valve that
closes when filter is removed.
®
53 for the reduction of lead, Class I particulate,
aesthetic chlorine, taste and odor.
Filter should be replaced every 1500 gallons
(5678 liter
s) or approx. one (1) year following
installation. Use part # 55897C when ordering
replacement filters.
Filtered Bi-Level
GENERAL
physically challenged individuals. Meets state
and federal accessibility requirement, including
Americans with Disabilities Act. Unit is certified
to NSF/ANSI 61& 372 and meets requirements
of Safe Drinking Water Act. Unit provides 50° F
water at 80° F inlet water and 90° F ambient.
Energy-efficiency performance exceeds average
market performance by 35%
Self-contained, high-efficiency refrigerated wall-
mount water cooler is easily accessibly for
SPEC00120