Specification Sheet

halseytaylor.com
HALSEY TAYLOR, 2222 Camden Court, OakBrook, IL 60523
SPEC00206 09/2014
Satisfying Thirsts Since 1912
*Rated for Indoor Use Only
HAC Cooler with
Bottle Filler
Model HTHB-HAC8BL and HTHB-HACDBL
Bi-Level HAC Cooler with
Hydroboost
®
Bottle Filler
MODELS:
HTHB-HAC8BL
HTHB-HACDBL
GENERAL
Complete water station including HydroBoost
®
bottle lling station and
HAC water cooler(s). Self-contained, wall-mounted bi-level water cooler.
Model HTHB-HAC8BL delivers chilled drinking water; model HTHB-HACDBL
delivers non-refrigerated drinking water. Exclusive one-piece, chrome-plated
two-stream Double Bubbler™ with non-removable anti-squirt feature and
integral hood. Automatic stream height regulator is located inside unit to
prevent tampering. Includes self-closing, light touch front and side pushbar
actuation with raised letters for the visually impaired. Type 300 series
stainless steel cooler top, with satin nish resists stains. Anti-splash ridge
reduces splatter. Contoured to insure proper drainage.
HYDROBOOST
®
BOTTLE FILLING STATION
Sensor-activated enhanced with user interface graphics. Quick ll
rate is 1.1 gallons per minute on refrigerated model and 1.5 gallon
per minute on non-refrigerated model. Laminar ow provides a
clean ll with minimal splash and easy maintenance. Equipped with
an automatic 20-second shut-off timer.
SILVER ION ANTI-MICROBIAL PROTECTION
Key plastic components are integrated with silver ion anti-microbial
protection to inhibit growth of mold and mildew.
GREEN COUNTER™
Visually displays count of plastic bottles saved from landlls. (Based
on 20 oz. bottles for refrigerated models)
DOUBLE BUBBLER™
Features an exclusive one-piece, chrome plated two-stream
mound-building bubbler with non-removable anti-squirt feature. It’s
integral hood insures a satisfying drink of water.
PUSH BAR ACTUATION MECHANISM
Self-closing light-touch push bars on front and sides with raised letters for the
visually impaired.
AUTOMATIC STREAM HEIGHT REGULATOR
Self-closing assembly is located inside unit to prevent tampering.
Unit resists corrosion and liming. A constant stream height is
automatically maintained under line pressures that vary from 20 to
105 psi.
INLET STRAINER
Easily cleaned in-line strainer screen traps particles of 140 microns or larger
before they enter the waterway.
WATER INLET - 3/8” O.D. Tubing. DRAIN OUTLET - 1-1/2”
tube outlet for 1-1/2” slip joint connection. Trap and service stop not
included.
REFRIGERATION SYSTEM (Model HTHB-HAC8BL only)
Hermetically sealed, positive start compressor with lifetime lubrication and
built-in overload protection, efcient capillary sizing, large capacity
dryer-strainer and self-lubricated fan cools copper/ aluminum condenser.
System uses R-134A refrigerant. Protected by Halsey Taylor’s
Limited 5 Year Warranty.
NOTE: Continued product improvement makes specication sheets subject to change without notice.
* Finish indicator: PV for Platinum Vinyl and SS for Stainless Steel cooler panels.
** With projector service and tap water at 80°F
t
UL 399 and ASHRAE (previously ARI 1010) compliant
Model
No.
GPH Capacity Cooled to 50°F** Base
Rate
Cap.
F.L.
Amps
Shipping
Weight
lb.
Rated
Watt
Usage
Ambient Air Temp
70°F 80°F 90°F
t
100°F
HTHB-HAC8BL* 9.7 8.8 8.0 7.2 8.0 3.8 89 260
HTHB-HACDBL* - - - - - 1.0 85 120
CAPACITIES CHART
Cooler panels available in Platinum Vinyl or Stainless Steel.
(additional cost)
SUGGESTED SPECIFICATION
Unit shall include a bi-level water cooler with a bottle lling station. Model
HTHB-HAC8 shall deliver 8 gph of 50°F drinking water at 90°F ambient air
and 80°F inlet water. Model HTHB-HACD shall deliver non-refrigerated
drinking water. Lower units shall have mechanically activated pushbar
activation. Bottle Filler shall include electronic sensor for no-touch
activation with automatic 20-second shut-off timer. Shall include a
Green Counter™ displaying the count of plastic bottles saved from the
landll. Shall provide 1.1-1.5 gpm with laminar ow to minimize
splashing. Shall include anti-microbial protected plastic components to
prevent mold and mildew. Cooler shall have stainless steel basin with
anti-splash ridge and removable drain strainer. Shall have front and
side pushbar activation with raised letters. Shall comply with ADA
guidelines for visual and motion disabilities. The manufacturer shall certify
the unit to meet the requirements of NSF/ANSI 61 and 372, UL 399 and
CAN/CSA 22.2 No. 120.
Model
HTHB-HAC8BL and
HTHB-HACDBL