Specification Sheet

HVR Cooler with
Bottle Filler
HTHBHVR8-NF
halseytaylor.com
HALSEY TAYLOR, 2222 CAMDEN COURT, OAK BROOK, ILLINOIS 60523
6-2016
JOB NAME: ______________________
________________________________
________________________________
ENGINEER/CONTRACTOR NAME:
________________________________
APPROVAL: _____________________
DATE: __________________________
Models:
Vandal-Resistant
HYDROBOOST
®
SUGGESTED SPECIFICATION
Model HTHBHVR8-NF shall deliver 8GPH of 50° F
drinking water
o
at 90° F ambient air and 80 F inlet
o
water. Model HTHBHVR-NF shall deliver
non-chilled drinking water. Shall have stainless
steel construction. Shall include vandal-resistant,
one-piece bubbler with integral hood. Shall
include vandal-resistant pushbutton activation
with embossed user graphics. Shall include
30-second auto
shut-off for water flow. Shall
include Green Counter with tempered glass
protective covering. Shall provide 1.1-1.5 gpm
with laminar flow for minimal splash and recessed
orifice to prevent cross-contamination. Cooler
shall have stainless steel basin with anti-splash
ridge and removable drain strainer. Shall
comply with ADA standards, UL399, CAN/CSA
22.2 No. 120, NSF/ANSI 61 and NSF/ANSI 372.
n
Stainless steel design for tamper-resistance. Pushbutton activatio
(
HTHBHVR-NF
Rated For Indoor/Outdoor Use
GENERAL
Complete water station including HydroBoost
®
bottle filling station and
HVR water cooler.
HVR
W
A
TE
R COOLER
Self-contained, stainless steel, wall mount single level water cooler.
Model HTHBHVR8-NF delivers chilled water; HTHBHVR-NF delivers
ambient drinking water. Vandal-resistant, one-piece, heavy-duty
bubbler with integral hood guard design to prevent tampering, airborne
deposits and contamination. Automatic stream height regula-tor is
located inside unit to prevent tampering. A constant stream height is
automatically maintained under line pressures that vary from 20 to 105
psi. Includes self-closing vandal-resistant pushbutton which does not
require grasping or twisting. Type 300 series stainless steel cooler top
with satin finish to resist stains and corrosion. Basin includes anti-
splash ridge and contoured to insure proper drainage.
HYDROBOOST
®
BOTTLE FILLING STATION
Stainless steel design for tamper-resistance. Pushbutton activation
enhanced with embossed user graphics. Quick fill rate is 1.1 gallons
per minute on chilled model and 1.5 gpm on ambient model. Laminar
flow provides a clean fill with minimal splash and easy maintenance.
30-second shut-off timer for water flow. Recessed orifice to prevent
cross-contamination.
GREEN COUNTER™
Visually displays count of plastic water bottles saved from waste.
(Based on 20 oz. bottles for refrigerated models.)
INLET STRAINER
Easily cleaned in-line strainer screen traps particles of 140 microns or
larger before they enter the waterway.
REFRIGERATION SYSTEM (Model HTHBHVR8BL-NF Only)
Unit provides 8GPH of 50
o
F drinking water at 90
o
F ambient air and
80
o
F inlet water. Hermetically sealed, positive start compressor
with lifetime lubrication and built-in overload protection, efficient
capillary sizing, large capacity dryer-strainer and self-lubricated fan
cools copper/ aluminum condenser. R-134a refrigerant. Protected by
Halsey Taylor’s Limited Warranty.
TEMPERATURE CONTROL
Positive sensing thermostat for controlling temperature of storage
tank water. Factory set at 50
o
F adjustable + 5
o
F.
Trap and service stop not included.
NOTE: Continued product improvement makes specification
sheets subject to change without notice.