Specification Sheet

HVR Bi-Level Cooler
with Bottle Filler
HTHBHVR8BL-NF
SUGGESTED SPECIFICATION
halseytaylor.com
HALSEY TAYLOR, 2222 CAMDEN COURT, OAK BROOK, ILLINOIS 60523
6-2016
JOB NAME: ______________________
________________________________
________________________________
ENGINEER/CONTRACTOR NAME:
________________________________
APPROVAL: _____________________
DATE: __________________________
Models:
Vandal-Resistant
HYDROBOOST
®
Model HTHBHVR8BL-NF shall deliver 8GPH of
50 F drinking water at 90
o
F ambient air and 80
o
F
inlet water. Model HTHBHVRBL-NF shall deliver
non-chilled drinking water. Shall have stainless
steel construction. Shall include vandal-resistant,
one-piece bubbler with integral hood. Shall
include vandal-resistant pushbutton activation
with embossed user graphics. Shall include
30-second auto shut-off for water flow. Shall
include Green Counter with tempered glass
protective covering. Shall provide 1.1-1.5 gpm
with laminar flow for minimal splash and recessed
orifice to prevent cross-contamination. Cooler
shall have stainless steel basin with anti-splash
ridge and removable drain strainer. Shall
comply with ADA standards, UL399, CAN/CSA
22.2 No. 120, NSF/ANSI 61 and NSF/ANSI 372.
o
GENERAL
Complete water station including HydroBoost
®
bottle filling station and
HVR water cooler.
HVR
W
A
TE
R COOLER
Self-contained, stainless steel, wall mount single level water cooler.
Model HTHBHVR8BL-NF delivers chilled water; HTHBHVRBL-NF
delivers ambient drinking water. Vandal-resistant, one-piece, heavy-
duty bubbler with integral hood guard design to prevent tampering,
airborne deposits and contamination. Automatic stream height regula-
tor is located inside unit to prevent tampering. A constant stream
height is automatically maintained under line pressures that vary from
20 to 105 psi. Includes self-closing vandal-resistant pushbutton which
does not require grasping or twisting. Type 300 series stainless steel
cooler top with satin finish to resist stains and corrosion. Basin
includes anti-splash ridge and contoured to insure proper drainage.
HYDROBOOST
®
BOTTLE FILLING STATION
Stainless steel design for tamper-resist tance. Pushbutton activation
enhanced with embossed user graphics. Quick fill rate is 1.1 gallons
per minute on chilled model and 1.5 gpm on ambient model. Laminar
flow provides a clean fill with minimal splash and easy maintenance.
30-second shut-off timer for water flow. Recessed orifice to prevent
cross-contamination.
GREEN COUNTER™
Visually displays count of plastic water bottles saved from waste.
(Based on 20 oz. bottles for refrigerated models.)
INLET STRAINER
Easily cleaned in-line strainer screen traps particles of 140 microns or
larger before they enter the waterway.
REFRIGERATION SYSTEM (Model HTHBHVR8BL-NF Only)
Unit provides 8GPH of 50
o
F drinking water at 90
o
F ambient air and
80
o
F inlet water. Hermetically sealed, positive start compressor
with lifetime lubrication and built-in overload protection, efficient
capillary sizing, large capacity dryer-strainer and self-lubricated fan
cools copper/ aluminum condenser. R-134a refrigerant. Protected by
Halsey Taylor’s Limited Warranty.
TEMPERATURE CONTROL
Positive sensing thermostat for controlling temperature of storage
tank water. Factory set at 50
o
F adjustable + 5
o
F.
Trap and service stop not included.
NOTE: Continued product improvement makes specification
sheets subject to change without notice.
HTHBHVRBL-NF
Rated for Indoor/Outdoor Use