Specification Sheet

ManualsBrandsHalsey Taylor ManualsShop All Halsey TaylorHalsey Taylor Contour Wall Mounted 8 (GPH) ADA Indoor Rated Reversed Bi-Level Filtered Bottle Filler Cooler Combo with Recessed Chiller

halseytaylor.com

HALSEY TAYLOR, 2222 Camden Court, Oak Brook, IL 60523

SPEC00318 08/2016

HydroBoost

In-Wall Bottle Filler

with Filtered Model HTHBWF-HRFSER

MODEL: HTHBWF-HRFSER

Satisfying Thirsts Since 1912

GENERAL

In-wall, recessed bottle lling station paired with the bi-level Contour™

refrigerated fountain. Includes 3000 gallon capacity WaterSentry

Plus

Filtration system and additional HWF172 1500 gallon lter on bi-level

fountain.

HYDROBOOST

BOTTLE FILLING STATION

In-wall, recessed design with solid lower panel. Quick ll rate is 1.1 gallons

per minute. Includes laminar ow to provide a clean ll with minimal splash

and easy maintenance. Equipped with automatic 20-second shut-off timer.

User interface design makes touchless operation intuitive. Key plastic

components are integrated with silver ion anti-microbial protection to inhibit

growth of mold and mildew.

Designed with hinged top and bottom stainless steel panels for easy

access and service.

GREEN COUNTER™

Visually displays count of plastic bottles saved from waste. (Based on

20 oz. bottles).

WATERSENTRY

PLUS FILTRATION

Equipped with the HWF3000 WaterSentry

Plus Filter. Features Quick-

Disconnect, 1/4 turn installation and automatic inlet shut-off valve that

closes when lter is removed. High grade lter is made with activated

carbon and patented ATS lead-removal media. Certied to NSF/ANSI 42 for

Chlorine-Class 1, Particulate-Class 1 and Taste and Odor and NSF/ANSI

53 for Lead Reduction. Filter is rated for 3,000 gallon capacity. Green,

yellow and red LEDs visually indicate when lter maintenance is required.

Replacement Filters: Available as Singles and Multi-Packs.

Order part numbers:

55898C - Single replacement lter

55898C - 3PK - Filter three pack

55898C - 12PK - Filter twelve pack

55898C - 24PK - Filter twenty-four pack

55898C - 48PK - Filter forty-eight pack

FOUNTAIN

Features contoured basin and softly rounded corners and edges.

HALSEY TAYLOR DOUBLE BUBBLER™

Exclusive one-piece, chrome-plated two-stream mound-building bubbler

with non-removable anti-squirt feature and integral hood insures a

satisfying drink of water.

AUTOMATIC STREAM HEIGHT REGULATOR

Self-closing assembly is located inside unit to prevent tampering. Unit

resists corrosion and liming. A constant stream height is automatically

maintained under line pressures that vary from 20 to 105 psi.

PUSHBUTTON ACTUATION

Self-closing, vandal-resistant pushbutton does not require grasping or

twisting.

Rated for Indoor Use Only

HRF Filtered Fountain

With Bottle Filler

MOUNTING FRAME

Manufactured from corrosion resistant, galvanized steel. Open construction

designed for ease of installation. Mounting frames can be shipped in

advance for rough-in installation.

SUGGESTED SPECIFICATIONS

Model HTHBWF-HRFSER provides 8.0 gph of 50°F water at 90°F ambient

and 80°F inlet water. Bottle ller shall be recessed design and include

electronic sensor activation with 20-second automatic water shut-off. Shall

provide 1.1 gpm ow rate with laminar ow to prevent splashing. Shall

include anti-microbial protected plastic components to prevent mold and

mildew. Shall include visual display of plastic bottles saved from waste.

Fountain shall have rounded corners and contoured basin, designed with

easy to operate pushbutton. Shall include SJ8 water chiller. Shall meet

ADA guidelines for visual and motion disabilities, when properly installed.

Shall be lead-free design which meets the Safe Drinking Water Act and is

certied to NSF/ANSI 61 and 372, UL 399 and CAN/CSA 22.2 No. 120.

Each HTHBWF-HRFSER is shipped in 7 cartons including:

HYDROBOOST Station with Louvered Lower Panel

HRF-SER Fountain

Mounting Frame (2)

HWF3000 WaterSentry

Plus Filter

Cooling Unit – SJ8 (2)

Stainless Steel Finish Only

CAPACITIES CHART

Model

Voltage /

Hertz

Chilling**

Capacity

F.L.

Amps

*Rated

Watts

Approx.

Ship

Wt.

UL399 and

CAN/CSA 22.2

No. 120

Certied

ADA

COMPLIANT

NSF/ANSI

61 and 372

Certied

NSF/ANSI

42 and 53

Certied

(Filter only)

HTHBWF-HRFSER 115V / 60Hz 8.0 GPH 5.0 740 167 lbs.

• • • •

*Based on 370 watts per chiller.

Note: Continued product improvement makes specication subject to change without

notice. See Halsey Taylor website for most current spec Sheet.

Summary of content (4 pages)

PAGE 1
Satisfying Thirsts Since 1912 HydroBoost® In-Wall Bottle Filler with Filtered Model HTHBWF-HRFSER HRF Filtered Fountain MODEL: HTHBWF-HRFSER With Bottle Filler GENERAL In-wall, recessed bottle filling station paired with the bi-level Contour™ refrigerated fountain. Includes 3000 gallon capacity WaterSentry® Plus Filtration system and additional HWF172 1500 gallon filter on bi-level fountain. Rated for Indoor Use Only HYDROBOOST ® BOTTLE FILLING STATION In-wall, recessed design with solid lower panel.
PAGE 2
Model HTHBWF-HRFSER HydroBoost® In-Wall Bottle Filler Satisfying Thirsts Since 1912 Rated for Indoor Use Only MOUNTING INSTRUCTIONS: Refer to diagrams for rough-in of plumbing and electrical sources. The support frame is to be installed first. Hang upper Bottle Filler panel to hanger on frame. Water service lines, waste lines and electrical are assembled as required. The bottom panel is attached last, after a final check for leaks and correct functions of Bottle Filler.
PAGE 3
Model HTHBWF-HRFSER Filtered Contour™ Fountain Satisfying Thirsts Since 1912 Rated for Indoor Use Only ELECTRICAL DATA Junction box for a (3) wire 10 AMP branch circuit. Standard 120 volt, 60 Hz, single phase. WALL OPENING IMPORTANT: It is necessary to create a wall opening 37 1/2” W x 37 3/4” H and 4 1/2” above the floor line. MOUNTING INSTRUCTIONS Refer to rough-in for location of plumbing and electrical sources. The support frame is to be installed first.
PAGE 4
Model HTHBWF-HRFSER Filtered Contour™ Fountain 1. Cut a rectangular wall opening 37-1/2” (953mm) W x 37-3/4” (959mm) H and 4-1/2” (114mm) above the floor line. The dimensions are required to obtain proper rim and bubbler heights for compliance with ANSI standard A117.1. 2. Reinforce the wall opening on all sides to adequately support the water fountain. This reinforcement must support up to 150 lbs. static load and provide a means for securing the frame assembly in place.