Specification Sheet

1000001943 (Rev. B - 08/16)

For Technical Service, please contact us at 1.800.476.4106

Elkay - www.elkay.com

Halsey Taylor - www.halseytaylor.com

FRAME

5/16" SCREWS OR BOLTS

(10 REQ'D - NOT FURNISHED)

INSTALL (2) SCREWS

(P/N 111008343890) IN FRAME

BEFORE INSTALLING IN OPENING

18 3/4"

476mm

31 3/4"

806mm

76mm

25"

635mm

MFWSF100 / MFWSF120 MOUNTING FRAME INSTRUCTIONS

1. Cut a square rectangular wall opening 18 3/4” (476mm) W x 31 3/4” (806mm) H and 25” (635mm) above

the oor line. These dimensions are required to obtain proper rim and bubbler heights for compliance with ANSI

standard A117.1.

2. Reinforce the wall opening on all sides so that it will adequately support the water fountain. This reinforcement

must support up to 150 lbs static load and provide a means for securing the frame assembly in place.

3. Install plumbing rough-ins.

4. Remove frame assembly and related hardware from packaging. Install the frame squarely in wall opening with

frame upright edges ush with the nished wall face. Secure the frame to the wall using (10) 5/16” bolts

or screws (not provided). Tighten securely.

NOTE: Be sure that frame is squared in location. Do not use less than required screw quantity and size.

MFWSF120