PLATINUM PRO PLUG-IN HONDA CIVIC (EP3) 2002-2005 (HT055047) QUICK START GUIDE HALTECH HEAD OFFICE: PH: +612 9729 0999 FAX: +612 9729 0900 EMAIL: sales@haltech.com HALTECH US OFFICE: EMAIL: usa@haltech.com See the Haltech Website for your local authorized dealer. www.haltech.
LIMITED WARRANTY Lockin Pty Ltd trading as Haltech warrants the Haltech TM Programmable Fuel Injection System to be free from defects in material or workmanship for a period of 12 months from the date of purchase. Proof of purchase, in the form of a bill of sale or receipted invoice, which indicates that the product is within the warranty period, must be presented to obtain warranty service.
Notes PLATINUM Pro Plugin Honda Civic (EP3) Quick Start Guide Congratulations on purchasing a Haltech Engine Management System. This fully programmable Plug and Play product opens the door to virtually limitless performance modification and tuning of your vehicle. Programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions.
ECU Installation ECU Pinout To install your new Platinum Pro Plug-in to your Honda Civic, please follow the procedures below. * Please Note the following Installation photos based on a Honda Civic Type R (EP3) You will require the following tools • • Socket set with 8mm and 10mm sockets Platinum Mounting Kit (HT039000) or Cable Ties / 3M Velcro tape or similar 1. Locate your factory ECU. This will be located on the passenger side of the vehicle behind the glove compartment.
The Haltech CAN Network 2. The Haltech CAN network allows for simple and effective expansion in ECU capability and functionality without having to go to the trouble of wiring in a whole new computer. Remove the cover under the glove compartment by gently pulling it downwards towards the floor. Your factory ECU connectors should now be visable. Proceed to remove the glove compartment by un-screwing the two 8mm screws holding it in place.
4. With the factory ECU removed, install the Haltech Plug-in ECU. Plug the 3 connectors into their respective locations on the front of the ECU. The optional auxiliary harness can be installed at this point if required. Mount the ECU to the factory cradle by means of the Haltech Platinum Mounting kit or Cable ties and Velcro Tape. Digital Pulsed Outputs ( DPO ) Digital Pulsed Outputs are capable of producing pulsed waveforms with varying duty and frequency.
6. Rear Auxiliary Connector The Platinum Pro Plugin Series allows further expansion of your ECU by the Rear Auxiliary Connector. The Rear Auxiliary connector allows you access to: • • • • With the engine started and running its time to tune. This is best achieved by your nearest engine tuner. See the listing of Haltech dealers on our website to find the one closest to you. Go to www.haltech.
ECU Manager Software ECU Manager / ECU Manuals ECU Manager software is used for setup, calibration and diagnostics and can be found on the CD supplied with this unit or downloaded from the Haltech website www.haltech.
ECU Manager Software ECU Manager / ECU Manuals ECU Manager software is used for setup, calibration and diagnostics and can be found on the CD supplied with this unit or downloaded from the Haltech website www.haltech.
6. Rear Auxiliary Connector The Platinum Pro Plugin Series allows further expansion of your ECU by the Rear Auxiliary Connector. The Rear Auxiliary connector allows you access to: • • • • With the engine started and running its time to tune. This is best achieved by your nearest engine tuner. See the listing of Haltech dealers on our website to find the one closest to you. Go to www.haltech.
4. With the factory ECU removed, install the Haltech Plug-in ECU. Plug the 3 connectors into their respective locations on the front of the ECU. The optional auxiliary harness can be installed at this point if required. Mount the ECU to the factory cradle by means of the Haltech Platinum Mounting kit or Cable ties and Velcro Tape. Digital Pulsed Outputs ( DPO ) Digital Pulsed Outputs are capable of producing pulsed waveforms with varying duty and frequency.
The Haltech CAN Network 2. The Haltech CAN network allows for simple and effective expansion in ECU capability and functionality without having to go to the trouble of wiring in a whole new computer. Remove the cover under the glove compartment by gently pulling it downwards towards the floor. Your factory ECU connectors should now be visable. Proceed to remove the glove compartment by un-screwing the two 8mm screws holding it in place.
ECU Installation ECU Pinout To install your new Platinum Pro Plug-in to your Honda Civic, please follow the procedures below. * Please Note the following Installation photos based on a Honda Civic Type R (EP3) You will require the following tools • • Socket set with 8mm and 10mm sockets Platinum Mounting Kit (HT039000) or Cable Ties / 3M Velcro tape or similar 1. Locate your factory ECU. This will be located on the passenger side of the vehicle behind the glove compartment.
Notes PLATINUM Pro Plugin Honda Civic (EP3) Quick Start Guide Congratulations on purchasing a Haltech Engine Management System. This fully programmable Plug and Play product opens the door to virtually limitless performance modification and tuning of your vehicle. Programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions.
LIMITED WARRANTY Lockin Pty Ltd trading as Haltech warrants the Haltech TM Programmable Fuel Injection System to be free from defects in material or workmanship for a period of 12 months from the date of purchase. Proof of purchase, in the form of a bill of sale or receipted invoice, which indicates that the product is within the warranty period, must be presented to obtain warranty service.
PLATINUM PRO PLUG-IN HONDA CIVIC (EP3) 2002-2005 (HT055047) QUICK START GUIDE HALTECH HEAD OFFICE: PH: +612 9729 0999 FAX: +612 9729 0900 EMAIL: sales@haltech.com HALTECH US OFFICE: EMAIL: usa@haltech.com See the Haltech Website for your local authorized dealer. www.haltech.
