Manual

Warning - batteries / button cells

• This product contains button cells. If the button cell is swallowed,

serious internal burns can occur within 2 hours and ultimately

lead to death.

• If you suspect that a button cell has been swallowed or is in

any part of the body, seek medical attention immediately.

• Keep new and used button cells out of the reach of children.

4. System Requirements

• The Bluetooth

remote release supports Bluetooth

-capable terminal devices such

as smartphones and tablet PCs that run the iOS 6 or Android 4.2.2 (or newer)

operating systems.

Note

• Note that support of the Bluetooth

remote release depends on your terminal

device.

• Please refer to the operating instructions for the device you are using.

5. Getting Started

• Open the battery compartment by undoing the screws on the battery cover (4) using

a screwdriver.

• Remove the battery cover (4) and insert a CR2032 battery with the correct polarity (B).

• Close the battery compartment by putting back the battery cover and tightening the

screws using a screwdriver (B).

6. Operation

Note

• The functions described in this section are only available for Bluetooth

-capable

terminal devices.

• Note that the maximum range for Bluetooth

is 10 metres without obstacles

such as walls, people, etc.