Manual

6.1. Bluetooth pairing
Note – Pairing
• Make sure that your Bluetooth
®
-capable terminal device is on and Bluetooth
®
is activated.
• Make sure that your Bluetooth
®
-capable terminal device is visible for other
Bluetooth
®
devices.
• For more information, please refer to the operating instructions of your terminal
device.
• Slide the On/off switch (2) to the ON position to switch on the Bluetooth
®
remote
release. The control light (1) begins to ash green (slowly).
• This means the Bluetooth
®
remote release is searching for a Bluetooth
®
connection.
• Open the Bluetooth
®
settings on your terminal device and wait until Hama BRS2
appears in the list of Bluetooth
®
devices found.
• Select Hama BRS2 and wait until the Bluetooth
®
remote release is listed as
connected in the Bluetooth
®
settings on your terminal device. The control light (1)
begins to ash green (quickly).
• You can now use the Bluetooth
®
remote release.
6.2. Automatic Bluetooth
®
connection (after successful pairing)
Note
• Make sure that your Bluetooth
®
-capable terminal device is on and Bluetooth
®
is activated.
• Make sure that your Bluetooth
®
-capable terminal device is visible for other
Bluetooth
®
devices.
• For more information, please refer to the operating instructions of your terminal
device.
• The Bluetooth
®
remote release remains connected to the Bluetooth
®
device it was
last paired with.
• Slide the On/off switch (2) to the ON position to switch on the Bluetooth
®
remote
release. The control light (1) begins to ash green (slowly).
• After 3–5 seconds, the Bluetooth
®
remote release automatically connects to the
device.
• You can now use the Bluetooth
®
remote release.
5