Owner's manual

26
11.5 Audio setting
Forsome stations with aweak signal, quality can be
slightly improved by playing them in mono quality.You
can enable this function in the menu, and the radio will
automatically switch to mono reception when signal
quality is poor.
To change the audio setting, proceed as follows:
[menu]
Audio
setting
12. Auxiliary Input
Via the analogue audio input (AUX IN socket) you can
connect mobile devices (for example smartphone, tablet
PC, M3 player etc.) to the radio and play the audio les
using the radio´s speakers.
• From the main menu or after pressing [mode]
repeatedly,activate Auxiliary Input (Aux in)mode.
[menu]
Main menu

Auxiliary Input
Alternatively,press [AUX]onthe remote control to
switch directly to this operating mode.
• Connect your mobile terminal device to the audio in (the
AUX IN socket) of the radio using a3.5-mm TRS stereo
cable.
• Start and control audio playback using the controls of the
connected terminal device.
13. Sleep
The radio has asleep function, after adened time the
radio switches to standby mode.
• Repeatedly press [
]or[SLEEP]onthe remote
control to set the desired time interval (Sleep OFF/
15/30/45/60/90/120 minutes).
[ ]
Alternatively,set the time interval from the main menu
using [enter/navigate]:
[menu]
Main menu

Sleep
• After the dened time the radio switches to standby
mode.
• Press [ ]-or[volume -/+]/[ ], to turn the
radio back on.
• If atime interval is already activated, you can change
or disable it at any time by again pressing [
]or
[SLEEP]onthe remote control.
Note -Backlight
Thereisaseparate setting for the backlight when the
timer (snooze) is activated. Forexample, it can be set to
be dimmer than in normal operation.
15.9. Backlight