Owner's manual

31
Manual conguration wired (LAN) –DHCP enable
• Select the option Wired.
• Select the option DHCP enable.
• The connection is now established. No further setting
adjustments arerequired.
Manual conguration wired (LAN) –DHCP disable
• Select the option Wired.
• Select the option DHCP disable.
• Enter the necessary network information, such as the
IP address, subnet mask, gateway address and DNS
(primary and secondary).
Find this information in the web interface of your router
or access point, or ask your network administrator.Once
all the information has been entered correctly,conrm
to proceed. The radio now attempts to establish the
connection.
Manual conguration wireless (WLAN) –
DHCP enable
• Select the option Wireless.
• Select the option DHCP enable.
• In the input screen, enter the whole SSID (network name)
and then conrm with OK.
• Now choose the security standardused by the network.
This can be found in the congur
ation options of your
router or access point.
• Depending on the encryption used, you may need
to enter the network key beforethe connection is
established..
Manual conguration wireless (WLAN) –
DHCP disable
The method described hereassumes the DHCP server is
active (manual wireless conguration(WLAN) –DHCP
enable). However,the network information such as IP
address, subnet mask, gateway address, and DNS (primary
and secondary) must still be entered.
Find this information in the web interface of your router
or access point, or ask your network administrator.Once
all the information has been entered correctly,conrm
to proceed. The radio now attempts to establish the
connection.
15.2.5 View settings
Hereyou can nd all the most important information about
all network connections currently used or congured on
the radio, such as: MACaddress, WLAN region, DHCP
active/disabled, SSID, IP address, subnet mask, gateway
address, DNS (primary and secondary), etc.
[menu]
System settings

Network

View settings
15.2.6 NetRemote PIN Setup /Smart Radio-App
The radio can be controlled using the application Hama
Smart Radio.
Forthis, you have to have installed the app on your
terminal device (for example smartphone or tablet PC)
and your device has to be in the same network as your
radio. The PIN saved in the radio is to increase security and
prevents other users from connecting with the radio.
If the app is started on your terminal device (for example
smartphone or tablet PC) and it tries to connect with the
radio, awindow will appear on your device requiring you
to enter the PIN.
• Youcan nd and change the PIN as follows:
[menu]
System settings

Network

NetRemote PIN Setup
• The radio PIN is set to 1234 by default.
• Use [enter/navigate]tomake changes.
• Conrm your changes by choosing OK.