Owner's manual

33
• Update from DAB/ FM
If automatic time and date adjustment is activated,
the device receives time and date information from the
station over the FM/DAB/DAB+ radio network. This is
the best way to ensurethat the clock will run accurately
and the alarm will trigger at the correct time, even after
power outages.
No update
The time and date (DD-MM-YYYY)must be set manually;
no automatic calibration takes place.
Set Time/ Date
Set the date (DD-MM-YYYY)and time (hh:mm)manually
using [enter/navigate].
Set format
Choose between 12 and 24 hours format.
15.4 Language
To change the menu language from that selected at rst-
time startup, proceed as follows:
[menu]
System settings

Language

Desired language
15.5 Factory Reset
To reset the radio to the factory default settings, proceed
as follows:
[menu]
System settings

Factory Reset
Conrm the following prompt with YES to reset the radio
to the factory default settings.
All settings made previously aredeleted.
Note
• Resetting to the factory default settings can solve
some problems and malfunctions.
• However,all settings made previously,such as custom
equaliser presets, favorites, and network proles, are
permanently deleted.
15.6 Software update
We areconstantly developing new softwarefeatures
and improvements for our radios to xproblems, add
functionality,etc.
We recommend that you keep your radio’s softwareupto
date.
• Proceed as follows:
[menu]
System settings

Softwareupdate