Operation Manual

16
GB
8. Additional functions
8.1 Slide show variations
8.2 Causes of errors and error rectification
The following table can be used to localise and rectify minor errors with the device:
Error Possible cause Solution
General information
Display is blank
Device is switched off Switch on the device.
Power supply adapter not
connected correctly
Ensure that the power supply
adapter is plugged in and
connected to the device.
No mains power Check your fuse box.
Device is faulty
Inform our customer service
department.
General
information
Device turns off
By static electricity, such as
occur during normal daily use
(carpet, wool sweater), it may
happen that the device will
go into Standby Mode.
In case that the device shouldn´t react
on any commands or show a black
screen, reset the device by pressing the
POWER button on the remote control
or on the backpanel of the device.
DPF
No image appears
No storage medium is
inserted
Insert a storage medium.
The storage medium does
not contain data
Check your storage medium.
NOTE
• Contact our customer service department if the problem remains after taking the steps
detailed above.