Manual

4
•Connect the enclosed USB-AtoUSB-C cable to the power pack's USB port (OUT 5V/3A)and the
USB-C port on your device (mobile phone, smartphone, etc.).
•Incertain circumstances, the enclosed charging /connecting cable may not match the USB port on
your device. In this case, use the USB cable that came with your device.
•When using the USB-C output (OUT 5V/3A)for the charging process, connect asuitable USB-C
charging cable to the USB-C output on the power pack and the port on your device.
•The charging process begins automatically.During the charging process, the status LEDs indicate
the power pack's remaining available capacity.
•The current battery charge status of your device is indicated on this.
•Terminate the charging process and switch the power pack off by pressing the button on the
power pack twice. The status LEDs go out.
•Inthe event that no device is connected, the power pack switches itself off automatically.
Note -optimised charging
Optimised charging means that the power pack recognises the connected device, supplies it with
the ideal current strength and thereforereduces the charging time to aminimum. Note that the
power pack's maximum current delivery is 3000 mA.
5. Care and maintenance
Only clean this product with aslightly damp, lint-free cloth and do not use aggressive cleaning
agents.
6. Warranty Disclaimer
Hama GmbH &CoKGassumes no liability and provides no warranty for damage resulting from
improper installation/mounting, improper use of the product or from failuretoobserve the operating
instructions and/or safety notes.
7. Technical data
USB-C input 5V 2A
Micro-USB input 5V 2A
USB-Aoutput 15V3A
USB-Aoutput 25V3A
USB-C output 5V 3A
Total output 5V 3A (max.)
Battery type 3.7V/Li-Po(high-density)
Min. capacity 24000mAh /88.80Wh
Typ. capacity 24300mAh /89.91Wh
Usable Capacity* 16906mAh @5V 2A
*The usable capacity is the capacity that can be drawn from the output sockets, measured at 5V
output voltage and adrawcurrent of 2A.