User manual

6.2 Automatic
Bluetooth
®
connection
(after successful pairing)
Note
•Make surethat your
Bluetooth
®
-capable terminal device
is on and Bluetooth
®
is activated.
•Make surethat your
Bluetooth
®
-capable terminal device
is visible for other Bluetooth
®
devices.
•For moreinformation, please refer
to the operating instructions of your
terminal device.
•Slide the OFF/ON switch (2) to the ON
position to switch on the
Bluetooth
®
keyboard. The power status LED (6)
lights up.
•Press and hold the Connect button (1)
until the
Bluetooth
®
status LED (4)
begins to continually ash blue. The
keyboardissearching for a Bluetooth
®
connection.
•Open the
Bluetooth
®
settings on your
terminal device and wait until Hama
KEY4ALL X3100 appears in the list of
Bluetooth
®
devices found.
•Select Hama KEY4ALL X3100.
•You can now use the
Bluetooth
®
keyboard.
Note –Connection impaired
After the devices have been
paired once, the connection is
then established automatically.If
the
Bluetooth
®
connection is not
established automatically,check the
following:
•Check the Bluetooth
®
settings of
your terminal device to see whether
Hama KEY4ALL X3100 is connected.
If not, repeat the steps listed under
6.1 Bluetooth
®
pairing.
•Check whether obstacles are
impairing the range. If so, move the
devices closer together.
6