Operation Manual

ManualsBrandsHama ManualsRemote Control20305 - Easytip M1

Deutsch

Key assignment M1

aPower/standby

b– Numerical keypad

cSwitching between 1-digit to 2-digit input

dSwitching to AV

eMute

fMenu ON/OFF

gTeletext ON

hTeletext OFF

iTeletext display with image

jFunction depending on TV set model

kProgramme + Cursor up in menu

lProgramme - Cursor down in menu

mVolume - Cursor left in menu

nVolume + Cursor right in menu

oConfirmation key (function depending on device)

Standard settings

pSelection of sound channel A/B

q16:9 switching

rPicture-in-picture

s-redFastext red

t-green Fastext green

u-yellow Fastext yellow

v-blue Fastext blue

w-white Info

xFunction key for the programming of the remot

control, shift key

Please note:

Certain devices may not support all functions.

USER MANUAL

Summary of content (10 pages)

PAGE 1
USER Deutsch MANUAL GB Key assignment M1 a b Power/standby – c Numerical keypad Switching between 1-digit to 2-digit input d Switching to AV e Mute f Menu ON/OFF g Teletext ON h Teletext OFF i Teletext display with image j Function depending on TV set model k Programme + l Programme - Cursor down in menu m Volume - Cursor left in menu n Volume + Cursor right in menu o Confirmation key (function depending on device) Standard settings p Selection of sound channel A/B q 16:9
PAGE 2
GB USER Deutsch MANUAL Key assignment M5 a b c d e f g – h i j k l m n o p q r s t u v w x y Disk Power/standby Numerical keypad Switching between 1-digit to 2-digit input Switching to AV Mute Menu ON/OFF TV: Teletext ON VCR: Long play (LP) SAT: Switching to radio DVD: Sound channel/speech selection TV: Teletext OFF VCR: HIFI SAT: Favourite programmes DVD: Subtitle selection TV: Teletext display with image VCR: Sound1/2 SAT: Reducing volume DVD: Camera angle TV: Function depending on TV set model
PAGE 3
GB USER Deutsch MANUAL Operating Manual Thank you for choosing this universal remote control. This product has been designed and manufactured to extremely high standards and if used properly will provide many years of reliable service. Replacing batteries Your universal remote control is powered by two 1.5 V AAA batteries. We recommend only new alkaline batteries are used. Never combine new and old batteries together as this will shorten the battery life and affect the performance of the remote.
PAGE 4
GB USER Deutsch MANUAL The 5-second rule universal remote control initially needs your assistance to work properly. All programming is based on the 5-second rule: every step in these instructions must be completed within 5 seconds after the previous step. Otherwise, the remote control returns to standard operating mode. This rule ensures that your remote control is not inadvertently reprogrammed by another user.
PAGE 5
GB USER Deutsch MANUAL Programming your universal remote control with automatic code scan Important: We recommend manually entering and trying all codes given for your device before running an automatic code scan. If the listed codes are not working for your TV set, etc., or if the manufacturer of your device is not listed, you have the option to let the remote control find a suitable code by means of the automatic code scan.
PAGE 6
GB USER Deutsch MANUAL Identifying the correct 4-digit code (after having run an automatic code scan) After using the automatic scan mode the remote will have selected a code which is unknown to you. Its important to know which code has been found so that it can be reinstalled should something happen to the remote. Please follow the steps below. Step 1 Select the device that you wish to control with your universal remote control by turning the disk until the arrow points to the desired device.
PAGE 7
GB USER Deutsch MANUAL 2. Special functions of your universal remote control universal remote control Your universal remote control universal remote control comes with a range of additional useful functions. To ensure that users have no difficulty operating the universal remote control remote control, some of the functions are not indicated on the device itself.
PAGE 8
USER Deutsch MANUAL GB Step 4 To save the changes made in the menu, press the Step 5 To exit the menu function press the key. key. If the original remote control of your component features a separate menu exit key, press the key at your universal remote control to exit the menu function. Menu control for your SAT receiver (only for M5): Step 1 Press and release key. Your SAT receiver should now show the settings menu. Step 2 The LED is continuously on.
PAGE 9
GB USER Deutsch MANUAL Additional shift functions. The following universal remote control functions are not indicated on the remote control itself to keep the layout of the keyboard easy to understand. These shift functions can be accessed by pressing the key and then the key to which the respective shift function is assigned. When you press the key, the LED is on, indicating that your remote control is in shift mode. Please note that the 5-second rule also applies to the shift function.
PAGE 10
GB USER Deutsch MANUAL HOTLINE To support our customers, we have set up a HOTLINE. However, all frequently asked questions are answered in this manual. Please read this manual carefully and make yourself familiar with the operation of your universal remote control remote control before you contact our HOTLINE. It is likely that your question is answered in the "Troubleshooting" sections below.