Instructions
Table Of Contents
- 1. Table of contents
- 2. Introduction
- 3. Safety instructions
- 4. Information and notes before getting started
- 5. Setting up the radio and accessories
- 6. Operating concept
- 7. Getting started
- 8. Navigation and controls
- 9. Menu structure
- 10. DAB radio
- 11. Internet radio & podcasts
- 11.1 Country (based on the IP address of the radio)
- 11.2 History (not yet available or empty during initial setup)
- 11.3 Search
- 11.4 Countries
- 11.5 Popular
- 11.6 Discover
- 11.7 Add stations and create/maintain your own favourites lists (web browser required)
- 11.8 Calling up the administration interface
- 11.9 Add your own stations
- 11.10 Delete stations
- 12. Spotify Connect
- 13. Amazon Music
- 14. Music player (USB)
- 15. CD player
- 16. VHF radio
- 17. AUX In (playback from external sources)
- 18. Bluetooth® playback (RX)
- 19. Routines
- 20. System settings - Overview
- 21. Network & Audio
- 22. Screen settings
- 23. System
- 24. About - System information
- 25. Technical data
32
This radio has a software-based VHF receiver that can receive and play analogue radio. It covers the
frequency range from 87.5 MHz to 108 MHz.
The radio automatically searches for stations that can be played back with sucient quality. As soon as a
station is found, the search stops automatically and playback starts. Start the search again to search for
the next available station.
• To tune into a station manually, rst switch to tuning mode.
• Tuning now takes place in steps of 0.05 MHz.
• Once you have set the frequency, you can switch back to the radio's volume setting.
• If manual tuning is active, the currently set frequency is highlighted on the screen.
NAVIGATE
FM
88.05 MHZ
88.00 MHZ
88.10 MHZ
FM
88.00 MHZ
Additional functions are available to optimise the quality of playback and the reliability of the search.
•
Conrm the selection with to play only stations that can be received by the radio in sucient
quality. Select to also stop at stations which can only be received in weak quality.
•
With analogue radio signals, the radio may try to automatically calculate and play back a stereo quality
reproduction. If there are audible quality problems during playback, select to play back the signal
unchanged in mono quality.
By selecting , the conversion to a stereo signal is carried out automatically.
NAVIGATE
ON OFF
Scanning
FM
SCANNING
AUDIO
ENTER