Instructions
Table Of Contents
- 1. Table of contents
- 2. Introduction
- 3. Safety instructions
- 4. Information and notes before getting started
- 5. Setting up the radio and accessories
- 6. Operating concept
- 7. Getting started
- 8. Navigation and controls
- 9. Menu structure
- 10. DAB radio
- 11. Internet radio & podcasts
- 11.1 Country (based on the IP address of the radio)
- 11.2 History (not yet available or empty during initial setup)
- 11.3 Search
- 11.4 Countries
- 11.5 Popular
- 11.6 Discover
- 11.7 Add stations and create/maintain your own favourites lists (web browser required)
- 11.8 Calling up the administration interface
- 11.9 Add your own stations
- 11.10 Delete stations
- 12. Spotify Connect
- 13. Amazon Music
- 14. Music player (USB)
- 15. CD player
- 16. VHF radio
- 17. AUX In (playback from external sources)
- 18. Bluetooth® playback (RX)
- 19. Routines
- 20. System settings - Overview
- 21. Network & Audio
- 22. Screen settings
- 23. System
- 24. About - System information
- 25. Technical data
48
You can choose between the display formats of 24 or 12 hours (am/pm) and adjust this at any time.
You can freely choose between the available time zones of Coordinated Universal Time (UTC) and use time
zones from -12 hours to +14 hours. For relevant time zones, metropolises and cities are listed after the
time zone adjustment.
If synchronisation via the Internet has been selected or you want to adjust the manually set time becOFFe
of the time change, you can activate summer time (YES) or winter time (NO) with this function.
This menu allows you to change the radio's system language.
The radio regularly switches to standby mode after 15 minutes without playback in order to save power.
Occasionally, there may be problems with playback via a jack connection becOFFe the transmitted signal
is too weak and the radio mistakenly assumes there is no active playback. To remedy this, you can
deactivate automatic standby by conrming the query with .
We are constantly developing improvements and new features for our radios to x problems, add
functionality, etc. We recommend that you keep your radio’s software up to date.
• Select Auto-Updates (YES) to allow the radio to automatically check for new software updates on a
regular basis. (Recommendation)
• Choose Check now to manually start a check for software updates.
This function allows you to reset your radio to the factory settings on the software side. Conrm the
prompt with to start the process.
Resetting to the factory default settings can remedy some problems and malfunctions.
However, all settings made previously, such as equaliser presets, station presets and network proles,
will be permanently deleted.