User Manual

ManualsBrandsHamee ManualsAudio EquipmentBluetooth Stereo Headset

SH03B Stereo Bluetooth Headset Specification

FCC ID:2AD2XSH03B

Basic Specifications

■Size: 31×28×9mm

■Weight: 17.2g（Net Weight）

■Charging port: Micro USB

■Keys: 5 (MFB button, volume+ button, volume- button, backward button, forward

button)

■Battery: Rechargeable lithium polymer battery 3.7V; 120mAh

■Charger output: 5V/0.5~1.0A

■Charge indicator: Red LED light (Charging) / Blue LED light (Charging completed)

■Standby time: about 200 hours

■Talk time: about 8 hours

■Music time: about 6 hours

■Charging time: about 2 hours

■Indicator for charge in working stage: Battery voltage lower than 3.3V（the stage of

battery lower than 15%)，there will be a warning tone; battery voltage lower than 3.1V

( the stage of battery lower than 5%), the headset will power off directly.

Speaker and MIC parameters

■S

peaker specifications / mode: Φ9mm

■Impedance: 32Ω/ typ

■Frequency(Hz): 20Hz～20KHz

■MIC Style: c

apacitive

■MIC

sensitivity:

-42±3dB

Bluetooth Parameters

■ Bluetooth version: 4.1

■ Support Profile: HSP, HFP, A2DP, AVRCP

■ The remote control to speaker: MFB (Power ON / Power Off / Play / Pause); Vol+, Vol-,

Previous song, Next song.

■ Device Name: SH03B

■ Pass: 0000

Summary of content (8 pages)

PAGE 1
SH03B Stereo Bluetooth Headset Specification FCC ID:2AD2XSH03B Basic Specifications ■Size: 31×28×9mm ■Weight: 17.2g（Net Weight） ■Charging port: Micro USB ■Keys: 5 (MFB button, volume+ button, volume- button, backward button, forward button) ■Battery: Rechargeable lithium polymer battery 3.7V; 120mAh ■Charger output: 5V/0.5~1.
PAGE 2
■ RF transmitter: class II (-6dBm ~ +4 dBm) ■ Receive sensitivity:-90dBm ■ Transmission Range (Hz): 2.402GHz ~ 2.480GHz ■ Transmission distance: 10m Certifications (TBD) Mechanical Reliability ■ Button: 10 thousand times ■ Charging Port（Micro USB）: plug 5000 times ■ LED: luminance/light-leaking luminosity must remain the same Operating Instructions Power On When the headset is off, press and hold the multi-function Button (MFB) for 2 seconds. The LED indicator will flash for one second in blue.
PAGE 3
Easy connection function If the headset doesn’t connect with any phones when it is on, you can enter into speed pairing mode by pressing the vol+ and vol- button concurrently and connect with your phone. Answering calls If a call comes in when listening to music or headset is standing by, press the MFB to answer the incoming call. You will hear the words “Call Answered” form the speaker of the headset.
PAGE 4
Switching Between Your Mobile Phone and Headset When talking on the phone, double-click the MFB to switch the voice from your headset to your mobile phone. By double-click the MFB again, the voice will switch back to the headset. You will hear the reminding tone. Reconnect When the headset is disconnected from your mobile phone, you will hear the words “Your headset is disconnected”. If you press the MFB, it will reconnect. You will hear the words “Your headset is connected” from the headset.
PAGE 5
Music Play Operating Music Play Operate on the phone or Click MFB of the headset. (Music will play automatically on some mobile phones when it connect with Bluetooth device) Pause and Restart Music When listening to music, click MFB to pause music and click MFB again to restart music. Volume To adjust the volume when listen music, press the V+ or V- to adjust the volume up or down. When you reach the max/min volume, you will hear a warning tone. Play Previous Song Press backward button.
PAGE 6
blue in alternating colors, the headset enters into pairing mode, select “YES” on the phone, then connect with the speaker. It will be display on the phone if connect successfully. Please repeat above operation if failed.
PAGE 7
Pairing time: 3 minutes. It will quit the pairing mode automatically after 3 minutes if without any connection with mobile phone when it is in the state of pairing. In addition, it can show the battery state on Apple devices.
PAGE 8
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.