Use and Care Manual

8
How to Use
Sure-Crisp
®
AIR FRY Mode
1. Plug into outlet.
2. Place Oven Rack in desired position with Slide-Out Crumb Tray in place.
3. Turn Function Dial to AIR FRY.
4. Air Fry Basket: Place Basket onto Bake/Broil Pan on Oven Rack.
5. Fan icon displays. Select temperature between 300°F (149°C) and 450°F
(232°C) by pressing TEMP/SHADE button and increasing or decreasing
temperature using + or – button. Default temperature is 450°F (232°C).
Display toggles between actual temperature and set temperature.
6. Preheat Oven. When preheat temperature has been reached, Display
will blink until START/STOP button has been pressed for timer to begin
countdown. If START/STOP button is not pressed after Oven reaches
preset temperature, Display will blink, and Oven will hold desired
temperature for 1 hour. After 1 hour Oven will beep 3 times, Display will
go blank and enter sleep mode.
7. Add food once set temperature is reached. Set time for up to 1 hour
by pressing TIME/SLICES button, using + or – button to adjust. Default
time is 25 minutes. Once a time is set Oven remembers that time unless
unplugged.
8. Unplug after cooking is complete.
NOTE: If time is selected, Timer will sound when selected time is complete.
If Stay On is selected, press START/STOP button to end cycle at any time.
w WARNING
Fire Hazard.
• If contents ignite, keep door closed and unplug oven. Allow
contents to stop burning and cool.
• Do not leave unattended while in use.
• Read and understand all safety instructions and Important
Safeguards before use.
• Always unplug toaster oven when not in use.
KEEP WARM Mode
Use to hold cooked foods at temperature for up to 2 hours. Place
Oven Rack in lower position.
1. Plug into outlet.
2. Place Oven Rack in desired position with Slide-Out Crumb Tray
in place.
3. Turn function dial to KEEP WARM. Temperature will default to
175°F (80°C) for 30 minutes but can be changed by pressing
TEMP/SHADE button and using + or – button to adjust.
Temperature range is 150°F (65°C) to 200°F (93°C).
4. When preheat temperature has been reached, Display will blink
until START/STOP button has been pressed for timer to begin
countdown. If START/STOP button is not pressed after Oven
reaches preset temperature, Display will blink, and Oven will
hold desired temperature for 2 hours. After 2 hours Oven will
beep 3 times, Display will go blank and enter sleep mode.
5. Time can be set from 1 minute to 2 hours and can be changed
at any time during cycle by pressing TIME/SLICES button, using
+ or – button to adjust.
6. Unplug after cooking is complete.