Use and Care Guide

2 3

How to Set Delay Start Timer

NOTE: Raw meat should NEVER be cooked using

Delay Start Timer. Visit www.foodsafety.gov for

more information on safe food handling.

Press up or down arrows to set

delay time. After approximately

5 seconds, the display will show

the selected delay time and the

unit will begin to count down.

After the delay time expires,

steamer will switch to cooking

mode and steam for selected

cook time.

Press ON/OFF ( ) button and then up or down arrows to set cooking time. Press DELAY button. The display

will flash 00:30 as the default delay time. Minimum set time is 30 minutes and maximum delay time is 24 hours.

• Cooking/steaming will begin once the unit has

completed the delay time countdown.

• The steamer will switch to WARM mode for up to

1 hour after cooking ends.

• If the water level in the steamer becomes too low,

it will switch OFF and flash “– –.” Fill the unit with

water to the MAX line; then push the ON/OFF ( )

button to restart the steamer. The LOW WATER

indicator light will also illuminate.

Unit will beep, display will tell you the water is low, and the LOW

WATER light will come on. To Add Water: Pull out water drawer and

gradually fill with water. Check the viewing window to see water level.

For Low Water: