Use and Care Guide

Programming – For Carafe Side Only

NOTE: The unit will only brew on one side at a time. Single-serve side

cannot be used while Carafe side is programmed.

1. Time must be set before coffee maker can be programmed. Press

and pulse SET TIME button for correct hour in AM or PM. Wait

3 seconds. Pulse or hold to set minutes.

2. To program, press and hold PROG button. Start Time is visible in

display and 19:99 flashes as default.

3. While continuing to hold PROG button, pulse SET TIME button to

set desired brewing hour in AM or PM. Wait 3 seconds; minutes

will flash. Pulse to set minutes. Release PROG button. Press and

release PROG button again to activate automatic brew. PROG light

will illuminate.

TIP: To check the start time, press and hold the PROG button. The

time you set will be displayed and can be changed by repeating the

steps above. Press PROG button to reactivate automatic brew and the

light will illuminate.