User's Manual

ASSEBLY

ASSEMBLY STEPS

STEP 8: Doors

1. Attach toolbox bracket to back of right door with four (4) M4 x 10 screws as shown in Fig.8a,

then attach three (3) M4 x 12 screws to back of right door without fully inserting the screws and

hang the toolbox onto the screws as shown in Fig.8b.

2. Insert the lower left door pin into the hole on the bottom shelf. Push down the upper door pin,

aligning it beneath the hole in door pin bracket, and release pin so that it inserts into the hole

as shown in Fig.8c.

3. Repeat step 2 for the right door.

Fig.8a

Fig.8c

Fig.8b