User Manual

ALS-600 Transmitter (Front Panel)
POWER SIGNAL
Hamilton Electronics
ALS-600 Transmitter
75.5
MHz
4 5 6
13
ALS-600 Transmitter (Rear Panel)
MICIN LINEIN
2 1 3
ANT
DC 12V
3
SETTING UP THE TRANSMITTER
LINE-IN
MICROPHONE INPUT
POWERING THE TRANSMITTER
The 1/4'' jack on the rear of the transmitter enables you to connect directly
from an audio source such as a tape player.
the 1/4'' jack on the back panel is designed to accept either
dynamic or electret microphones.
Connect the AC adapter provided into the 12V DC jack on the back panel of the
transmitter. Plug the other end into an AC wall socket.
Press power switch on, the power on LED will show power is getting to the
system.
The transmitter's ''signal ''LED will illuminate to confirm that the transmitter is
broadcasting.
•
•
1
2
3
4
6
5