Buhl LyteBoard Interactive Whiteboard User Guide Buhl Industries www.buhl-ind.
Buhl LyteBoard IWB User Guide V.12/7/09 Contents 1. Declaration..................................................................................................................... 3 1.1 Important Notes ..................................................................................................... 3 1.2 Copyright ............................................................................................................... 4 2. Introduction ............................................................
Buhl LyteBoard IWB User Guide V.12/7/09 1. Declaration 1.1 Important Notes To ensure that you can use this product correctly please be sure to comply with the use of manual strictly. Please read this manual before installation in order to avoid unnecessary problems and also save your time. Please completed the after-sales service card in detail and require the designated dealers of Buhl Industries to stamp their official seals on it.
Buhl LyteBoard IWB User Guide V.12/7/09 This product protected under the Copyright Law of People’s Republic of China, international treaties and the law of the country that the users in. This product will be prohibited in any way to be copied, modified, rented, leased, loan or transferred this product, or any part of it, unless with written agreement. The products will be prohibited reverse engineering, reverse compiler, disassemble or other ways of finding source code for this product.
Buhl LyteBoard IWB User Guide V.12/7/09 insert and control. With the help of the third-party remote collaboration software, not only achieve the functions of long-distance education and meetings which are powerful Interactive teaching and learning and demonstration, but also create multimedia courseware for the classroom and the meetings. The product can completely replace the blackboard and ordinary Whiteboard in teaching and demonstration.
Buhl LyteBoard IWB User Guide V.
Buhl LyteBoard IWB User Guide V.12/7/09 IRBOARD-88 Infrared interactive Whiteboard Appearance: black Al frame, white PVC board, writeable film Touch square: 1795mm(width) ×1145mm (height) Physic size: 1960mm(width) X 1290mm(height) X 40mm(thick) Writing tool: Finger or other opaque object 2.
Buhl LyteBoard IWB User Guide V.12/7/09 2.3 Technical Index Touch characteristics Induction way : Infrared induction Positioning accuracy : Typical accuracy﹤2mm Cursor speed : 120d/s Resolution : 4096 × 4096 First spot(click) : 25 ms Respond time: Continuous(write) : 8 ms Respond objects’ size: Touch life: ﹥Ø3.0mm ,recommended size:Ø5.0mm exceed 60,000,000 single-point touch Power supply USB provides power directly Power supply: (no external power connection) Working voltage: DC 4.
Buhl LyteBoard IWB User Guide V.12/7/09 Incandescent lamp (220V,100W),working distance: Illumination test 350mm Working height above sea level 3,000m PC USB2.0 Working lifetime: More than 5years Working Environment: Can work under the sun, indoor and outdoor. Software function Mouse function Can completely instead of mouse. Support click, double click and right click Support OFFICE software such as PPT, WORD, EXCEL, Remark function etc. Hold on the pen to remark directly.
Buhl LyteBoard IWB User Guide V.12/7/09 Multimedia Presentation functions Support to introduce all kinds of files such as FLASH , PPT,Movie, music and so on。 Support to keep the sound and written contents as Multimedia record function multimedia files functions, so that you can copy or replay the contents。 Camera function Support camera function Index function Support the search function on Whiteboards 2.
Buhl LyteBoard IWB User Guide V.12/7/09 3. Installation and Connection 3.1 Whiteboard Installation 3.1.1 Wall-mounted Installation Accessories list: total 2 12 12 name wall-mounted pieces expansion screw screw(3.5*16KA) use of quantity 2 8 8 Installation steps: 1. wall-mounted pieces Installation (1)Check the height and location of the Whiteboard installation, then line out the center position of wall-mounted pieces(P 3-1) on the wall.(P 3-2) P 3-1 Page 11 of 43 www.buhl-ind.
Buhl LyteBoard IWB User Guide V.12/7/09 1170mm h floor P 3-2 (2)To drill holes at the marked position of the screw on the wall with a drill bit (diameter 6 mm), then put the expansion screws into the holes. (3)Fix the wall-mounted pieces onto the wall with eight screws (3.5*1 KA). Finish wall-mounted pieces installation. 2. Whiteboard Installation Aim the holes of the Whiteboard (P 3-3) at the wall-mounted pieces, and then hang the Whiteboard onto the wall-mounted pieces. P 3-3 Notice: 1.
Buhl LyteBoard IWB User Guide V.12/7/09 center distance of 1170mm. 3. The perfect height between Whiteboard and the floor is 75-80cm. 3.1.2 Rolling floor stand Installation Accessories list: Name Total use of quantity parts of floor stand 4 4 wheel 4 4 screw 12 12 pothook 4 4 Installation steps: 1. Install floor stand (1) Fix four parts of floor stand with screws (P 3-4) P 3-4 Page 13 of 43 www.buhl-ind.
Buhl LyteBoard IWB User Guide V.12/7/09 (2) install the wheels (P 3-5) P 3-5 (3) Finish installing floor stand (P 3-6) P 3-6 2. Whiteboard Installation (1) Place Whiteboard on the level and fix up all of the wheels (P 3-5) (2) Choose any pair of hooks (3) Put up the Whiteboard, aim the holes of the Whiteboard at the hooks, then hang the Whiteboard onto the floor stand. Notice: You should call us to buy the floor stand which is the not the requisite. Page 14 of 43 www.buhl-ind.
Buhl LyteBoard IWB User Guide V.12/7/09 3.2 Intelligent Penholder Installation 1. Please do not use knives or other sharp things to open the packing boxes , so as not to damage the Whiteboard. Take out the accessories and intelligent penholder and remove the packing of them. 2. Negative place Whiteboard onto the desk .and prepare to connect with the intelligent penholder.
Buhl LyteBoard IWB User Guide V.12/7/09 P 3-8 Connect the two data cable thrums (P 3-9) P 3-9 Put the joined line into the groove of the Whiteboard (3-10) P 3-10 3. Fix penholder onto the Aluminum frame of the Whiteboard with screws(3*8KM) P 3-11 Three steps for fastness (P 3-12;3-13;3-14) Page 16 of 43 www.buhl-ind.
Buhl LyteBoard IWB User Guide V.12/7/09 P 3-12 P 3-13 P 3-14 4. Finish installing intelligent penholder (P 3-15) Page 17 of 43 www.buhl-ind.
Buhl LyteBoard IWB User Guide V.12/7/09 P 3-15 3.3 Connecting to PC and Projector 3.3.1 Connecting between Whiteboard and PC 1. Connect Whiteboard to PC with a USB cable, no external power. Insert one end of USB into the USB port of the Whiteboard. (P 3-16) P 3-16 2. USB cable fastness (P 3-17) Page 18 of 43 www.buhl-ind.
Buhl LyteBoard IWB User Guide V.12/7/09 P 3-17 3.Insert the other end of USB into the PC (P 3-18) P 3-18 Page 19 of 43 www.buhl-ind.
Buhl LyteBoard IWB User Guide V.12/7/09 3.3.2 Connecting between projector and PC Connect projector to PC with a VGA cable. Insert one end of VGA into the VGA port of the PC. (P 3-19) VGA USB P 3-19 Notice: 1. Avoid excessive dust, smoke or high-temperature 2. Avoid laying the data cable on the floor in order not to stumble. (Please straighten the data cable and fix it with a insulating tape which has warning color, in case that the data cable must be laid on the floor.) 3.3.
Buhl LyteBoard IWB User Guide V.12/7/09 P 3-20 3.3.4 Projector adjusting Turn on and adjust the projector to make sure that the images from projector are projected onto the effective area of the Whiteboard (the effective area is the center area which is 1 CM from the border of the Whiteboard), and then rectify the projective images to keep it square. Notice: 1.It is possible to get inaccurate orientation on condition that the images are not square or projector does not aim at the Whiteboard. 2.
Buhl LyteBoard IWB User Guide V.12/7/09 3.4 3.4.1 Driver Installation and Uninstall Driver Installation Run “Setup.exe” of the installation CD, follow the instruction. (P 3-21 to 3-27) P 3-21 Page 22 of 43 www.buhl-ind.
Buhl LyteBoard IWB User Guide V.12/7/09 P 3-22 P 3-23 Page 23 of 43 www.buhl-ind.
Buhl LyteBoard IWB User Guide V.12/7/09 P 3-24 P 3-25 Page 24 of 43 www.buhl-ind.
Buhl LyteBoard IWB User Guide V.12/7/09 P 3-26 P 3-27 Notice: You will be prompted “find new hardware” by the system, If the PC, which is Page 25 of 43 www.buhl-ind.
Buhl LyteBoard IWB User Guide V.12/7/09 first connected to the Whiteboard, not be orientated or installed drive. And then you’d better install the driver that is under the file named “DRIVER” for installing. 3.4.2 Driver Uninstall 1. Open drivers file, run “Setup.exe”, click “ remove”, namely, finish driver uninstall. 2. Choose [Control Panel]—[Add and Delete process], then find [Buhl interactive electronically Whiteboard] and click “remove”, namely, finish driver uninstall. Page 26 of 43 www.buhl-ind.
Buhl LyteBoard IWB User Guide V.12/7/09 4. Operation instruction for Whiteboard software 4.1 Software Characters Human design, retain the traditional mode of writing Intelligent penholder, lift the pen and write immediately Whiteboard software are tailored to conference and teaching Image manipulation base on vector graph and has features of High-compression and without distortion.
Buhl LyteBoard IWB User Guide V.12/7/09 4.2.2 Whiteboard orientation It is necessary to fix position of Whiteboard to make pen or fingertip coincidence before using for the first time. There is no need to reorientation unless change the environment. Orientation method: First start the Whiteboard , right click this icon ( )in the lower right corner and choose [Orientate Whiteboard], then you will see the full screen with a white anchor point at the top left corner (P 4-1).
Buhl LyteBoard IWB User Guide V.12/7/09 P 4-2 P 4-3 Page 29 of 43 www.buhl-ind.
Buhl LyteBoard IWB User Guide V.12/7/09 P 4-4 Notice: 1. If your pen or finger haven’t click at the center of the anchor point or wrong click or appear next anchor point without clicking, then you need to click the “ESC” key to exit orientation or reorientation for the next time, otherwise it is unable to make pen or fingertip coincidence. 2. While orientation, keep the pen or fingertip perpendicular to the board as possible as you can. 3.
Buhl LyteBoard IWB User Guide V.12/7/09 P 4-5 Page 31 of 43 www.buhl-ind.
Buhl LyteBoard IWB User Guide V.12/7/09 Simple Description of functions (P 4-6) P4-6 4.3.2 Simple Description of functions No. Icons and functions Functions and Operation Icons 1. Switching into computer mode Function: Switching into computer mode Operation: Click this icon,then switching into computer mode. Page 32 of 43 www.buhl-ind.
Buhl LyteBoard IWB User Guide V.12/7/09 Menu Function : Display the popup menu Operation: Click the icon to display popup menu. Selection Function: Select Operation: Click the icon on the toolbar. On the popup dialog box, select Diagram, Text, and Picture. 2. 3. Undo Function: Undoes the previous operation Operation: Click this icon on the toolbar to undo an operation Redo Function: Redo the previous operation Operation: Click this icon on the toolbar to redo an operation 4. 5.
Buhl LyteBoard IWB User Guide V.12/7/09 Hard pen Function: The hard script handwriting is sinewy. Operation: Click the icon on the popup toolbar, click the hard script button. You can write on the board Brush Function: Brush Operation: Click the icon on the popup toolbar, click the hard script button. You can write on the board Highlight pen Function: High light pen; It is a half transparent pen for marking the key points Operation: Click the highlight pen button.
Buhl LyteBoard IWB User Guide V.12/7/09 Triangle Polygon Insert image 9. Insert tools Insert Flash 10. Set color 11. Transparency 12. Line width 13. Line cap 14. Input text Function: Triangle Operation: Click the triangle button. A dialog box is displayed for you to select a figure. Select a triangle and drag it to specify the required size. Function: Polygon Operation: Click the icon. On the popup sub toolbar, click a polygon button. The figure selection dialog box is displayed.
Buhl LyteBoard IWB User Guide V.12/7/09 15. Word annotation 16. Resource Searchlight Screen cover Camera 17. Auxiliary tools Magnifier Ruler Protractor Functions: MS WORD annotation Operation: Open word file, run Drawview and annotate on WORD file, after annotation finished then click this icon, the dialog box is then display asking if you want to save annotation, click yes to save comment. ( This function doesn’t work in Vista system.) Function: To use the resource Operation: Click this icon.
Buhl LyteBoard IWB User Guide V.12/7/09 and click icon to stop. 2. Play the saved video:Click icon Handwriting . Function: Input handwriting, Operation: Select the handwriting input tool on the popup sub toolbar. The handwriting input dialog box is then displayed. Tool bar icons 18. Switching into computer mode 19. Eraser 20. Free move 21. Return to page center 22. Previous page 23. Next page 24.
Buhl LyteBoard IWB User Guide V.12/7/09 Zoom out Function: Zoom out the current page Operation: Click on the toolbar to zoom out on the current page. Resource Function: Resource hotkey Operation: Click this icon to open resource panel. 25. 26. Bin 27. Recycle Bin Function: Clear the contents of the page. Operation: Double click this icon,the dialog box is then displayed asking whether clear up the entire page, click yes to clear up. Or drag the contents to be deleted to the recycle bin. 5.
Buhl LyteBoard IWB User Guide V.12/7/09 Notice: Keep the resolution at 1024﹡768 and turn off all of the Energy-saving way in order to avoid delay from dormancy. When the Whiteboard is not in use, please pull out the data line between Buhl IWB and PC. 5.2 Caution 1.
Buhl LyteBoard IWB User Guide V.12/7/09 forcibly install, to avoid deformation of Whiteboard. 4. Avoid using the Buhl IWB under excessive dust, wet, high-temperature or strong light. Keep away from high heat or corrosive chemicals. Please pay attention to fireproofing, avoid operating while close to the fire. Whiteboard is not waterproof; therefore prevent it from getting wet by rain or other means. All the above mentioned situations will cause distortion and aging, also shorten products life. 5.
Buhl LyteBoard IWB User Guide V.12/7/09 provided by Buhl IWB, 6. Appendix 6.
Buhl LyteBoard IWB User Guide V.12/7/09 Q: Cannot make out handwriting on Whiteboard. A: Writing the wrong way. See [P 6-1] for right way, [P 6-2] for wrong way. P 6-1 P 6-2 Notice: A single point of writing, please keep writing tools (finger or other non-translucent objects) single pointing perpendicularly to the white board, at the same time, Whiteboard should be avoided contacting with other objects. 6.
Buhl LyteBoard IWB User Guide V.12/7/09 1. The steps of connect USB to Whiteboard are the same with P 3-16 and P 3-17 2. Connecting between USB and USB HUB. (P 6-3) P 6-3 3. Connect the other end of USB HUB to PC. (P 6-4) P 6-4 6.3 Service Information www.buhl-ind.com 800-631-0868 support@buhl-ind.com Page 43 of 43 www.buhl-ind.