Hamilton PA-85 OPERATION MANUAL
SPECIFICATIONS IMPORTANT SAFEGUARDS AMPLIFIER Power supply: IMPORTANT AC120V/60Hz To protect rechargeable battery life, this unit is shipped without installing battery fuse. Before using this unit please install fuse (included in accessories pack). Charge the battery fully before first use. Charge battery each month if you are not going to use this unit for a long period of time. Avoid total discharging of the battery.
PARTS DESCRIPTION AMPLIFIER 4. USING TAPE CASSETTE PLAYER & RECORDER 1) Insert the tape into cassette holder after press STOP/EJECT button. And Rear Panel then press PLAY button to enjoy the tape. 2) Adjust volume controls of the amplifier and CD/TAPE to the suitable level. 3) Treble and bass control adjustment depends on your request. 1 2 + + + 3 5. USING WIRED MICROPHONE DVD PLAYER 5 4 1) Plug wired microphone to MIC in jack. 2) Turn the volume control of each MIC to the desired position.
PARTS DESCRIPTION C. Charge the built in rechargeable battery. Front 1) Using supplied AC cord to connect the unit to suitable power source with the correct voltage as marked. Charge LED indicator will flash. NOTE: Either DVD power and main AMP power is on or off, the battery 27. Metal corner 28. Full range speaker 29. Battery compartment 27 will be charged once you plug AC power. 28 2) Charge indicator will turn from red to green when battery is fully charged.
FEATURES REMOTE CONTROL 1. POWER: Turn on/off DVD. 2. OPEN/CLOSE: To open and close DVD tray. 3. MUTE: To mute DVD sound. 4. Number Key: 1~0/10: To input number less than and equal to 10 10+: Press 10+ and then 1~9 to input number more than 10 5. SETUP: Press this button to set up system 6. DISPLAY: press to display track no, playing time, time left etc. 7. SUBTITLE: to change caption language. Valid only when playing file has different languages options. 8. ANGLE: To change the angel of movie.
