Operating Guide

AudioAce™ Portable Bluetooth

CD Player

Getting Started / Main Operation

Power On the Unit:

Press the Power button to turn the unit on or off.

Adjusting the Volume:

Press the Volume buttons to increase or decrease the volume level.

Adjusting the Antenna Rod:

The antenna should be extended to ensure good reception. It may be

necessary to alter the position of the unit and/or antenna to achieve the

best signal.

Using Headphones:

This unit can support up to 6 headphones connected together. The

headphone sockets are located on the side of the unit. The headphones

must be compatible with a 3.5mm diameter plug.

X-BASS (Bass Boost):

Press the X-BASS button to turn on or off X-BASS function.

DC Batteries / AC Power Operation

Battery Operation:

Before installing batteries, ensure that the unit is disconnected from the

main AC power supply. Remove the battery compartment cover on the

bottom of the unit.

This unit utilizes (8) 1.5V C-size batteries (not included). Be careful to

insert the batteries according to the correct polarity +/-. Never mix old and

new batteries. Re-attach the cover. For battery operation, disconnect the

main AC power supply and remove the cable from the power socket.

Battery operation will be selected automatically.

Install Batteries