Operating Guide

11
AudioAce™ Portable Bluetooth
®
CD Player
AC Operation:
Use the 6V adapter (included) by connecting the small end of adapter
cable into the DC hack at the rear of the unit. Insert the adapter plug into a
conveniently-located AC outlet. Please ensure that your mains supply is
compatible before use.
Listening to the Radio
Using the Radio:
1. Press the Source button to select FM mode.
2. The LCD Display will show the frequency of the radio.
Automatic Radio Tuning:
1. In FM mode, press the /Tune+ or /Tune- to manually scan
through the frequency band.
2. If the reception does not improve, try altering the position/length of the
antenna. If the reception is still poor, scan again to determine whether
a stronger signal exists for the desired frequency.
Programming Radio Presets:
You can preset up to 20 stations.
1. Tune to the station you wish to preset (see Using the Radio).
2. Press the MEM/PROG button, the preset station number (P01-P20)
will appear on the display.
3. Use the Stop/M+ button to select the preset position.
4. Press the MEM/PROG button again to save the current station into
the specified preset.
5. Repeat steps 1-4 to store additional radio presets.
Recall a Preset Radio Station:
1. Press the Stop/M+ button to search for your preset radio stations.