Operating Guide

13
AudioAce™ Portable Bluetooth
®
CD Player
Using Repeat Function:
1. Press the Repeat button once to repeat current track playing.
2. Press the Repeat button twice to repeat all tracks on the CD.
3. To cancel the repeat function, press the Repeat button until “1 or ALL”
icons disappear or press the Stop/M+ button.
Using a Bluetooth
®
Device
This unit can connect to any Bluetooth
®
-enabled device by following the
steps below.
Setup Your Unit on Bluetooth
®
(bt) Mode:
1. Press the Source button to select (bt) mode.
2. “bt” will be flashing on the LCD display.
3. Follow the next step below.
Set your Bluetooth
®
-Enabled Device to “Discover” Your Unit:
1. First make sure that Bluetooth
®
is activated on your device.
2. Then, set your Bluetooth
®
-enabled device to search for your unit.
This usually involves going to “setup”, “connect” or Bluetooth
®
” menu
on your device and selecting the option to search/scan/discover a
Bluetooth
®
device.
3. Your device will find the unit under the name “MPC5050BT”.
4. Your Bluetooth
®
-enabled device will then ask to pair with the unit.
5. Accept by pressing “yes” or “ok” on the Bluetooth
®
-enabled device.
6. When Bluetooth
®
-enabled device has been successfully paired,
the “bt” digits of LCD display will stop flashing and make a sound.
Note: These steps must be repeated when pairing any new Bluetooth
®
-
enabled device.
Warning: If connection is unsuccessful, the “bt” will flash slowly on the
LCD display.
After Initial Pairing:
If the unit has already been paired with a Bluetooth
®
-enabled device, it
will automatically start searching for the previously paired device. Once
the previously paired device is found, the “bt” digits will stop flashing and
make a sound.