WIRELESS HEADPHONE SYSTEM (For W900-MULTI, W900-BLTM, W901-MULTI) INSTRUCTION MANUAL
Wireless Headphone System W900-BLTM Bluetooth Transmitter Setup 1. Extend the antenna vertically to full height. 2. Plug the 12V/1A power adapter into “DC12V” socket on the rear of transmitter. Insert power adapter into power outlet. 3. Adjust the switch to “ON” position for use with power adapter. Adjust to “BATT” position for use with internal rechargeable battery. Adjust to “OFF” to turn off the unit. 4. Plug the adapter into the “DC12V” jack to charge the battery. The “CHARGE LED” will be lit.
Wireless Headphone System Using Your W901-MULTI Wireless Headphones (Compatible with both the W900-MULTI and W900-BLTM models) Note: Fully charge headphones before using for the first time. See Instructions. 1. Press and hold the “Power” button more than 3 seconds to power up the headphone. The selected channel color will be shown on the “CH LED”. 2. The channel LED “CH LED” will show five colors as “Yellow – Blue – Flashing Blue – Green – Red”. Blue for Mono mode and Flashing Blue for Stereo mode. 3.
Wireless Headphone System In the Box W900-MULTI W900-BLTM W901-MULTI • • • • • • • • • Unit • Manual Unit Manual 5072 - 1/4” Plug W980 - Power Adapter Unit Manual 5072 - 1/4” Plug W980 - Power Adapter Optional Supplies W990 Replacement 6-way charging cable for 900 series headphones. Do not combine two W990 cables with one AC power adapter (W980). Note: To charge an additional headphone, be sure to purchase an additional AC power Adapter (W980).
