User manual

15
• On the Basic Wireless Settings screen, select Communication Type according to
your network:
- Infrastructure
- Ad-Hoc
• Enter the proper SSID of your wireless network.
- Channel: optional
- Data Transmit Rates: select Auto or others
- Transmit Mode: select Auto or others
• On the Wireless Security screen, enable or disable WEP/WPA/WPA2 encryption,
configure according to your wireless network and click Next.
• On the TCP/IP Settings screen, specify a fixed or dynamic IP address for the print
server, a fixed IP address is highly recommended. Click Next.
Click Yes if you want change IP address of the print server, and then click Next.
Note:
The IP address of print server must be within the same subnet as your network adapter.
After you save the new IP address, the print server will automatic reboot once to make
ready for the new IP address. It may take a couple of seconds.
7. In the setup wizard, select an already configured printer from the list, click Next, Next
and then Finish to complete the installation.
Or select Add New Printer if the print server is connected to a printer that hasn’t been
installed before and does not appear in the list.