Datasheet

59036
www.hamlin.com
T
55505 Hall Effect Flange Mount Geartooth Sensor
Features
● Ferrous target sensing
● Internal circuit protection
● Protection against severe and
automotive environments
● Self adjusting magnetic range
● Automotive grade circuit protection
● High speed operation
● Short circuit and reverse voltage
protection
● On board 10 bit A/D convertor
Benefits
● No chopper delay
● Rotational alignment to target not
critical
● Immune to target run out
Benefits
● Wheel, transmission and
camshaft speed sensing
● Geartooth sensor
● Rotary encoders
● Industrial
● Commercial
● Automotive
DIMENSIONS (in) mm
SPECIFICATIONS
Hall Type Digital Switch 3 Wire (Voltage Output)
Supply Voltage Operate Vdc 4.75 to 24
Supply Voltage Overvoltage Protection Vdc - max. 27
Supply Voltage Reverse Voltage Protection Vdc - max. -25
Output High Voltage Vdc VDD -2 (-2 sinking output with internal pull-up)
Output Low Voltage Vdc - max. 0.6 @ 20mA
Output Current (continuously on) mA - max. 20
Current Consumption mA - max. 1
Current Consumption mA - max. 10.5
Switching Speed kHz - max. 15
Temperature Operate
°C
-40 to +125
Temperature Storage
°C
-65 to +125
Cable Length:-
(Cable Type 20AWG Type TXL per SAE
J-1128)
Standard Lengths
SELECT
OPTION
CABLE
LENGTH
(in) mm
01 (3.94) 100
02 (11.81) 300
03 (19.69) 500
04 (29.53) 750
05 (39.37) 1000
TABLE 1
Termination Options:-
SELECT
OPTION
DESCRIPTION
A Tinned Leads
B Deutsch DTM04-3P
C Molex MX 150
TABLE 2
Series 55505
Cable Length
Termination
Table 1
Table 2
55505 00 XX
X
Hamlin USA Tel: [phone] • Fax: [phone] • Email: [e-mail]
Hamlin Europe Tel: [phone] • Fax: [phone] • Email: [e-mail]
Hamlin China Tel: [phone] • Fax: [phone] • Email: [e-mail]
DRGNo: 55505XXXXX REV : AD Date: 9/6/12 DCR: B9016
APPLICATION EXAMPLE - Geartooth Sensor
CUSTOMER OPTIONS - Cable Length and Termination
ORDERING INFORMATION