Datasheet

.004)TYP
15,62±0.25
(.615±.010)
12,45±0.25
(.490±.010)
0,00
(.000)MIN
(.078)MAX
2,00
10,16
(.400)MAX
(.039±
1,00±0.10
(.071)MAX
Ø1,80
(.051)TYP
1,30
RECOMMENDED LAND PATTERN
(.441)
11,20
(.114)TYP
2,90
•
Surface mounting normally open switch
•
Sub-miniature size with 10.16mm x 1.80
mm (0.400” x 0.071”) glass envelope
•
Capable of switching 200Vdc or 0.5A
at up to 10W
•
10
12
Ohms insulation resistance
•
Available sensitivity 10-25 AT
•
Bulk or tape and reel packaging. See sheet 2
Benefits Applications
www.hamlin.com
Contact Rating (1) Power Watts - max 10
Voltage Switching Vdc - max. 200
Breakdown Vdc - min. 250
Current Switching A - max. 0.5
Carry A - max. 1.0
Resistance Contact, Initial Ohms - max. 0.12
Insulation Ohms - min. 10
12
Temperature Operating °C -40 to +125
Storage (2) °C -65 to +125
Capacitance Contact pF - typ. 0.2
Vibration 50-2000 Hz. G - max. 30
ELECTRICAL RATINGS Contact Form A - Normally Open
SWITCH DIMENSIONS (in) mm
SWITCH TYPE MDSM-10
•
Hermetically sealed switch contacts
are not affected by and have no effect
on their external environment
•
Low, stable contact resistance
•
Very small space requirements
•
Zero operating power required for
contact closure
•
Fit and forget durability
OPERATING CHARACTERISTICS
Features
•
Position sensing
•
Level sensing
•
Security
•
Metering
•
Mobile phones
File E47258 MDSM-10 REED SWITCH
Issue:1 19/11/04 DCR:B2737
Time Operate (3) ms - max. 0.5
Release (3) ms - max. 0.1
Shock 11ms ½ sine G - max. 100
Resonant Frequency kHz -typ. 6.5
MAGNETIC CHARACTERISTICS
Pull-In Ranges Available Switch AT before modification Ampere Turns (AT) 10-25, 10-15, 15-20 and 20-25
Rating Sensitivity (4) Ampere Turns (AT) 15
Test Coil L4989
Hamlin USA Tel: [phone] Fax: [phone] Email: [e-mail]
Hamlin UK Tel: [phone] Fax: [phone] Email: [e-mail]
Hamlin Germany Tel: [phone] Fax: [phone] Email: [e-mail]
Hamectrol France Tel: [phone] Fax: [phone] Email: [e-mail]
DETAILS ON THIS DATA SHEET ARE PROVIDED FOR INFORMATION PURPOSES ONLY
&
SHOULD NOT BE RELIED UPON AS BEING ACCURATE FOR ANY PARTICULAR PURPOSE
Product performance may be affected by the application that the part is used for.
Upon request Hamlin will assist purchasers by providing information specific to a particular application.
Hamlin disclaims all liability whatsoever for any purchaser’s reliance upon the information
contained in this data sheet without further consultation with Hamlin’s authorised representatives.
Notes:- 1) Contact Rating. Product of the switching voltage and current must never exceed the wattage rating. Contact Hamlin for additional load/life information.
2) Storage Temperature. Long term exposure at elevated temperature may degrade solderability of the leads.
3) Operate (including bounce) /Release Time. Tested per EIA/NARM RS421A with diode suppressed coil.
4) Rating Sensitivity. The value at which the contact ratings and operating characteristics are determined. De-rating may be required below this value.
Sheet 1 of 2 Sheets
®