Datasheet

SECTION A-A
WALL MOUNT FOOT
FLUSH MOUNT INSTALLATION
WALL MOUNT FOOT
www.hammondmfg.com
®
INSTRUCTIONS
A
A
32.94
[1.30]
4.50
[.18]
5.50
[.22]
4.50
[
.18]
16.95
[.67]
.30
[.01]
R4.50
[R.18]
R2.40
[R.09]
R4.50
[R.18]
4.50 THRU
 8.80 X 82.0°
15.90
[.63]
6.47
[.25]
6.47
[.25]
9.00 THRU
 12.00 X 90.0°
DETENT FOR #8
PAN HEAD SCREW
ALIGNING SQUARE
MOUNTING HOLE
FOR SC556 SELF
TAPPING SCREW
GUIDE FOR FLUSH
MOUNT INSTALL
At the correct spacing for your enclosure,
we recommend installing two #8 pan head
screw (not included),
1.
See Part
Drawing
for Spacing
2.
Using a mounting foot, set the height for the screw
by loosely tightening the screw onto the foot.
Remove foot and give the screw 1/4 turn more.
3.
Push enclosure onto installed screws.
Press down on top of the enclosure till you
feel the detent click over the pan head screw.
some adjustment may be required.
4.
2
1
Install mounting feet to enclosure,
using supplied screws with a torque of
Polycarbonate 100 - 110 cN-m or 8.8 - 9.7 lbf-in.
ABS 80 - 90 cN-m or 7 - 8 lbf-in.
1.
Mount enclosure to object. Reccomend
using #8 pan head screws (not included).
2.
Install mounting feet to enclosure,
using supplied screws with a torque of
Polycarbonate 100 - 110 cN-m or 8.8 - 9.7 lbf-in.
ABS 80 - 90 cN-m or 7 - 8 lbf-in.
HEAVY DUTY MOUNT INSTALLATION