User Manual

*#1 :-%
Owner’s Manual
106
ZONES
To control external MIDI equipment, ranges on the keyboard of
this instrument are assigned.  ey are called “External Zones”.
 e range of the built-in sound engine on this keyboard (called
“Internal Zone”) is set at the same time. You can use each sepa-
rately on a single manual keyboard.
Each MIDI keyboard connected to the MIDI IN jack can control
the external MIDI equipment with the external zone.
To locate this mode:
WHAT IS DISPLAYED ON THE UPPER LEFT?
On the upper left of the Zone mode, the Zone to be operated
now is displayed.
INT: Internal zone
XZn: External zone (#n)
 INTERNAL ZONE
❶ MANUAL BASS - MODE
 is is for setting the how the Manual Bass (P. 30) works.
LOW: Sounds on lowest note if a chord is played.
CHRD: Sounds suitable bass note if a chord is played on Lower part.
POLY: Sounds the chord if a chord played.
❷ MANUAL BASS - LIMIT
Sets the upper limit note for the Manual Bass function.
❸ SPLIT POINT
Sets the upper limit note for the Lower part when using the
split function (P. 30).
❹ OCTAVE - UPPER
Sets the octave of the Upper part.
❺ OCTAVE - LOWER on SPLIT
 is is for setting the octave of the Lower part.  is parameter
works on split Lower division of built-in keyboard.
❻ OCTAVE - LOWER on REAL
 is is for setting the octave of the Lower part.  is parameter
works on expanded Lower keyboard.
 EXTERNAL ZONE
❻ SWITCH
Sets whether or not to send the MIDI message in this zone.
❼ MIDI CHANNEL
Sets the MIDI send channel 1 to 16 of this zone.
❽ KEYBOARD ALLOCATE
Sets which keyboard to allocate this zone.
Set to the UPPER if it is only the XK-1C.
If there is an expanded keyboard, you can control the external
zone using the Lower keyboard or the Pedalboard. If applica-
ble, set to LOWER or PEDAL.
Set at OFF if an external synthesizer is connected, to change
the Program or volume only, without sending the note (play-
ing) messages.
❾ ZONE - LOW
󱀓 ZONE - HIGH
Sets the keyboard range for playing this zone.
Set the lower limit with LO and the upper limit with HI.
NOTE: 9 and 10 can also be set by pressing the [RECORD] button
with play the desired note on the keyboard.
󱀔 PROGRAM - BANK MSB
󱀕 PROGRAM - BANK LSB
󱀖 PROGRAM - PROGRAM CHANGE
Sets Bank Select and the Program Change to send to this zone.
Generally, switching the tone of an external synthesizer or sam-
pler is set by changing the Bank Select and the Program Change.
Please consult the owners manual of your MIDI equipment to
obtain the proper settings for Bank and Program change.
You can select the Bank MSB and LSB at 0 to 127, the Program
Change at 1 to 128.
󱀗 NOTE - OCTAVE
Sets octave shift of this zone. If an external synthesizer sound
in a diff erent octave from that you desire, adjust this parameter.
 e setting range is -2 to +2.
See “Function mode” (P. 62) for operation details.
❶ ❷❻
❼❽ ❾󱀓󱀔 󱀕󱀖󱀗 󱀘󱀙󱀚󱀛
❸❹❺