User Manual

*#1 :-%
Owner’s Manual
80
RECORD
ENTER
VA L U E
EXIT
MENU /
RECORD
ENTER
VA L U E
EXIT
MENU /
EXTERNAL LESLIE SPEAKER
󱀞 LESLIE CHANNELS
Sets the channel for the Leslie speaker connected to the LESLIE 8-PIN jack.
1ch: For connecting a 1 channel Leslie cabinet such as the 122XB, 3300/3300W (with no sta-
tionary speakers). The Drawbar and the percussion sounds are output only from the rotary
channel always. The Pipe voices are from the LINE OUT jack.
3ch: This is for connecting a 3 channel Leslie cabinet such as the 2101/mk2. The Drawbar and
the percussion sounds are output from the rotary channel, the Pipe voices and bypassed
Drawbar and percussion sounds are from the stationary channel of the Main and Aux.
NOTE: This is a system parameter. It is recorded upon setting, and is common with all patch-
es.
RECORD THE CABINET
Record the Leslie Parameter (#2 to #20 on the previous page) to
the Cabinet Numbers and use them selecting at the patches.
1
Give a name to the cabinet as desired.
2
Press the [RECORD] button in the Leslie Parameter setting
mode (#2 to #20).
 e Cabinet Select mode is displayed.
3
Select the Cabinet Number to record with the [VALUE] knob.
4
Recording is made upon pressing the [ENTER].
 e display is as the above during the treatment.
NOTE: If you don’t wish to record, touch the [MENU/EXIT] button.
LESLIE - continued
RECORD
ENTER
VA L U E
EXIT
MENU /
5
231
64
7 8 MANUAL