Operation Manual

103

MIDI

5. PROGRAM - BANK MSB

6. PROGRAM - BANK LSB

7. PROGRAM - PROGRAM CHANGE

These are for setting the Bank Select and the Program Change data to be transmitted by this zone.

Please consult the users guide/manual for your specific piece of outboard gear that you wish to control

for the exact combination of commands that allow bank and program change.

You can choose 0 - 127 in the Bank MSB and the Bank LSB, and 1 - 128 in the Program Change.

8. NOTE - OCTAVE

This is for selecting the octave to be transmitted by this zone. The octave that is transmitted may be set

to be different than the octave that you may be playing.

9. NOTE - VOLUME

This is for setting the volume (= Control Change #7) of this zone. However, the set value will be null,

if the CC# (item #14) is at “7.VOL”.

10.NOTE - PAN

This is for setting the Pan (= Control Change #10) of this zone.

NUMBER BASE

Some MIDI modules map their presets

from 0 - 127, and some from 1 - 128. If

your instrument does not respond to the

exact number of program change, you

may need to decrease the program

change number here by the value [1].

13 14