Operation Manual
104
*#1 $OM%OM$2OMOwner’s Manual
11. NOTE - VELOCITY
This is for setting the Velocity Curve to send to this zone.
The setting range is OF, 1 - 4. The velocity of OF is fixed at 100. At 1 - 4, the higher the value
increases, the higher velocity is transmitted regardless how the key is played.
NOTE: As the Pedalboard of this organ has no velocity sensing function, the velocity of PD1 - 3 is
fixed at OF.
12.EXPRESSION - MINIMUM
13.EXPRESSION - MAXIMUM
These set the range of expression to “compress” to send to this Zone.
If the expression pedal of this organ is fully returned the organ will still be heard.
With many types of external sound gear, the volumes do not react the same. This parameter allows
a smooth and equal flow in the expression pedal.
You can select 0 - 63 by MIN, and 64 - 127 by MAX.
14.EXPRESSION - CONTROL NUMBER
This is for setting the MIDI continuous Control Number of the Expression Pedal.
Depending on your external equipment, it may react to CC#7 (Volume) or CC#11 (Expression).
This parameter allows you to make that choice.
15.MESSAGE - DAMPER
This is for setting the transmission of Damper (Control Change #64) to this zone using the Foot
Switch on the Expression Pedal.
The message is sent at ON, and is not at OFF.
NOTE: All the parameters in these modes are Preset Parameters. They can be recorded to the Com-
bination Presets. See the Appendix for details of the Preset Parameters.
1 2 3 4 5 6 7 8 9 10 11