Operation Manual
108
*#1 $OM%OM$2OMOwner’s Manual
SAVE YOUR SETUP
CF CARD YOU CAN USE
The manufacturer recommends genuine Hammond 65971-02128
as your CF card.
Please consult URL: http://www.hammondsuzuki.com before you
try to use other cards on the market.
CF CARD SLOT
1. First please read the label on the CF card carefully and insert
it correctly.
2. To take out the card, push the EJECT button on the right hand
side of the slot.
3. Don’t eject the card or switch the power off during initializing
or setting it up.
How to access the CF card slot
THE CARD CAPACITY AND CONTENT TO BE
SAVED
The CF card can save:
Combination Presets
Global Parameters
Custom Tonewheels
Leslie Cabinets
Adjust Presets [A<], [B]
Temporary Parameters
Also, this card can save/read out all of them as a whole by the unit
called “SET-UP”. The capacity of one SET-UP is approximately
44 KB.
B-3 mk2, C-3 mk2 B-3P mk2
Turn and remove the knob bolts with a coin from the back of the
organ. Then take off the rear panel.
Turn the screws with the #2 Phillips screw driver and take off the
HAMMOND plate on the back of the organ.
About the CF Card
On this organ you can save the setting of each Parameter as a file, into a
CompactFlash™ card (hereinafter “CF card”) up to 99 files.
Eject Button