Operation Manual

ManualsBrandsHammond ManualsAudioB-3 mk2

*#1 $OM%OM$2OMOwner’s Manual

Accessory Panel (B-3P mk2)

SOUND INPUT TERMINAL

47. LINE IN Jack

These jacks are for connecting an external sound module or a

CD player. The signals input to this jack are output to the LINE

OUT jack, and headphone jack, the stationary channel of a so-

equipped Leslie Spaker. (Rating Input Level: 1.23V +4dBm, In-

put Impedance: 5kΩ)

SOUND OUTPUT TERMINAL

48. LINE OUT Jack

These jacks are a stereo main out for the organ post-internal

effects.

Use both L and R, if the connected mixer or monitor speaker is

stereo, and use only L, if monaural.

When a Leslie speaker is connected, the built-in Leslie effect

appears only on the L jack.

49. PEDAL OUT Jack

This is an independent output terminal for the Pedal part.

EFFECT LOOP

50. SEND Jack

This is a post-internal effects patch-out point.

When a plug is inserted to this jack, signals inside the organ are

cut off. (Rating Output Level: 1.23V +4dBm, Output Imped-

ance: 600Ω)

51. RETURN Jack

This is a post-internal effects patch-in point.

This jack is used also as the input terminal to the rotary channel

from an external sound engine. (Rating Input Level: 1.23V

+4dBm, Input Impedance: 10kΩ)

MIDI TERMINAL

52. MIDI OUT Jack

This is for sending MIDI information to external MIDI equip-

ment such as a Synthesizer or Sound Module.

53. MIDI PEDAL IN Jack

This is the input terminal for a MIDI Pedalboard.

LESLIE SOCKETS

54. MAIN

Connect the first Leslie speaker to this socket. If the Main/Echo

switch (optional) is connected to the MAIN/ECHO jack on the

Volume Panel (#22), Sound is not passed unless you set the switch

at the MAIN position.

55. ECHO

Connect the second Leslie speaker to this socket. Sound is not

passed unless you set the switch to the ECHO position when the

Main/Echo switch (optional) is connected to this organ.

Power Panel (B-3P mk2)

AC INLET

56. AC INLET

Connects the A.C. Power Cable.

CAUTION

This organ shall be connected to a MAINS

socket outlet with a protective earth (ground)

connection.

PEDAL CONNECTORS

57. EXP. PEDAL Connector

Connect the Expression Pedal (provided) here.

If no expression pedal is connected, the volume is set to

maximum, as if the pedal were fully depressed.

58. PEDALBOARD Connector

Connect the Pedalboard PK-25PR (optional) here.

4950