Operation Manual

Turn On And Play

Add Effects

LESLIE

VIBRATO AND CHORUS

OVERDRIVE

REVERB

“Vibrato and Chorus” slightly changes the Drawbar pitch and adds warmth to the sound.

[SWELL] Tablet, [GREAT] Tablet

Switches the Vibrato/Chorus on and off for each manual.

[VIBRATO AND CHORUS MODE] Knob

Controls the Vibrato and Chorus Depth.

The degree of depth corresponds with the number. “V” adds Vibrato sound by changing the pitch,

“C” adds the original shimmering Hammond chorus.

NOTE: You can fine-adjust the speed etc. of the Vibrato&Chorus. (P. 82)

Adds tube-based distortion to the sound.

[OVERDRIVE] Knob

Controls the distortion amount. Full left is “clean”. The distortion effect increase as you rotate the

knob clockwise.

NOTE: Overdrive distortion can be fine-set. (P. 80)

The Leslie speaker uses a rotating treble horn and a woofer firing into a rotating drum to give the

organ a “3-D” sound, with motion and lively dynamics. It is the traditional partner of the Hammond

Organ.

LESLIE SPEED Switch

This is for switching the mode of the Leslie Speaker or the built-in Leslie Effect.

At CHORALE the rotor turns slowly, at TREMOLO fast. It stops at STOP.

NOTE: You can fine-adjust the rotation speed etc. of the internal LESLIE Effect. (P. 84)

The reverb effect simulates performing in a concert-hall.

[REVERB] Knob

Controls the depth of the Reverb Effect. At full left the Reverb Effect is off. The effect deepens as

you rotate the knob.

NOTE: You can fine-control time etc. of Reverb. (P. 88)

EQUALIZER

Controls the overall tone of the organ.

[BASS] Knob

Increases or decreases the emphasis of the Bass range of sound.

[TREBLE] Knob

Increases or decreases the emphasis of the Treble range of sound.

NOTE: Each BASS, TREBLE knob can be assigned to a different band respectively. (P. 88

#6, 7)