Operation Manual

Setting Up

EQUALIZER, REVERB

The Equalizer and the Reverb add a final touch to the tone.

The Equalizer regulates the tonal quality. The Reverb adds the effect of playing in a

concert hall.

You control their basic functions on the panel under the left side of the keydesk.

Equalizer

Reverb

[BASS] Knob

BASS is assigned here at the time of shipment from the factory. This increases/decreases the bass

sound. About ±9dB is adjustable at 100Hz.

[TREBLE] Knob

TONE is assigned here at the time of shipment from the factory. It increases/decreases the treble

sound. About -9 to +3dB is adjustable at 10kHz.

NOTE: The Equalizer actually has 3 bands and 1 tonal function, and one function is assignable to each

BASS, TREBLE knob. (P. 88)

NOTE: The “Tone” function here refers to the unique internal control on the vintage B-3 that gently cut the

treble. This is a different function than the “Treble” EQ.

[REVERB] Knob

This is for controlling the depth of the reverb effect. It gives no reverb effect at full counter-clockwise.

The reverb gets deeper as it is turned further clockwise.

NOTE: You can finely set the reverb. (P. 89)