Operation Manual

Introduction

MULTI-CONTACT MANUALS

The keyboards used in this organ have been totally redesigned and 100% faithfully replicates the “Direct Analog Keying

System” used on the original B-3.

TONE-WHEELS REBORN THROUGH DIGITAL TECHNOLOGY

The “Digital Tone-Wheel System” replicates the Tone-Wheel wave-forms created by the mechanical system of the

original B-3. The 96 wave-forms are always in oscillation just as in the original.

ALL CONTROLS EXACTLY AS ON THE ORIGINAL

All the controls from the Panel Switches to the Preset Keys have been faithfully replicated. This organ can be played

with the same technique as the original B-3.

TUBE PRE-AMPLIFIER

A pre-amp circuit using a 12AU7 tube is built in, and unique tube over-drive sounds are obtained. The bias-voltage-

adjustment function enables not only general clip distortion but also nonlinear distortion.

DIGITAL LESLIE/VIBRATO

The scanner vibrato and Leslie speaker are replicated via a DSP effects section. The Vibrato & Chorus effects are the

same as on the original B-3. The built-in Leslie gives the familiar Leslie sound when no actual Leslie speaker is available

or when practicing with headphones.

EQUALIZER AND TONE CONTROL

A 3-band equalizer and tone-control are now built in. The equalizer can make fine or coarse tonal adjustments to the

bass, treble, and mid frequency ranges. The tone-control simulates the unique circuit built in on the vintage B-3 pre-amp

to obtain a gently-cut treble.

MIDI MASTER KEYBOARD

3 external zones are available on each manual and pedalboard to enable this organ to be used as a master keyboard. A

MIDI pedalboard can also be used instead of the traditional pedalboard.

CompactFlash™ CARD

You can use a CompactFlash Card to save various Parameter files.

MAIN FEATURES