Operation Manual
92
*#1 $OM%OM$2OMOwner’s Manual
CUST. TW (CUSTom Tone-Wheels)
In this mode, you can regulate the tonal qualities of the virtual
tone-wheel generator, wheel by wheel.
The virtual tone-wheel generator consists of 96 different pitches,
where one wheel may correspond with plural notes and the “foot”
designation of the Drawbars.
The relation is complicated. For example, the middle C of 8' and
the C one octave lower of 4' use the identical wheel.
In this organ, you can save 2 types of settings per virtual Tone-
INITIAL VALUE OF THE CUSTOM NUMBER
As the initial value, the typical setting is recorded to
each Custom No. 1.
For example, “Real B-3”, a simulated original B-3 in
good condition, is in B-Type 1.
1. TONE-WHEEL SET
This is for selecting the Tone-Wheel set.
2. CUSTOM NUMBER
This is for selecting the “CUSTOM NUMBER” to use or compile. The “*” will be dis-
played when the Tone-wheel parameters are changed from this Custom Number.
NOTE: This parameter is a Global Parameter. It is not recorded into the Combination Preset.
3. CUSTOM NAME
You can name the CUSTOM TONEWHEELS using up to 10 letters.
Move the cursor by the [PARAM] button and choose the letters by the [VALUE] button.
By pressing the [VALUE] button while holding down the [RECORD] button, it jumps to
the top of each letter type (space, 0, A, a).
The name set here, as well as the Tonewheel parameters below, will be deleted, if you do
not do the recording operation as explained on the next paragraph.
4. WHEEL NUMBER
Select the number of the wheel you want to adjust.
To select the Wheel Number, select the [VALUE] button, or slightly move the feet of the
Drawbar while depressing the key you want to regulate. (See the illustration.)
When the Wheel Number is selected, the level for the wheel (#5) is displayed.
Wheel Set. These are called “CUSTOM TONE-WHEELS”.
The factory default gives a choice of B-3 “types”. You may cre-
ate your own.
To locate this mode:
Press the [MENU/EXIT] button and display MENU, select PAGE
C by the [PAGE] button, and then press the [4] CUST. TW
button.
How to select the WHEEL NUMBER
1
2
3
54
4 6 7