Operation Manual

101
MIDI
1. Connect as shown above.
Connect the MIDI OUT of this organ to the MIDI IN of the equipment you wish to control.
When the MIDI Pedal board is connected to the MIDI PEDAL IN jack, the performance is treated
the same as the traditional Pedalboard.
2. Set the parameters of each zone, and record it to the Combination Preset, as desired.
Read the next page “EX. ZONE (External Zone)” for setting each zone.
You can control external MIDI equipment with up to 3 zones per each of the Swell,
Great manuals and Pedalboard.
NOTE ON THE SOUNDING POINT
The External Zones sound at a deeper point of the
key than the Drawbar tones.
This is for outputting the velocity info. to the Exter-
nal Zone.
This is due to the extra velocity-sensing MIDI key-
board contact that lies below the direct analog key-
ing system.
CONTROLLING EXTERNAL MIDI EQUIPMENT