Operation Manual

Introduction

Connect the Pedalboard

1. Place the Pedalboard on the floor in front of the organ.

2. Take the Pedal Cable out of the organ and insert the plug

into the connector on the Pedalboard.

3. Hold the plug with the “Retention Hook” and lock it on

by turning the screw knob.

4. Slide and push in the Pedalboard beneath the organ until

it stops.

HA<O>

1. Locate a #2 Phillips Screw Driver.

2. Position the Leslie Speed Switch on the front left of the

Great Manual. The distance it from the left sideboard must

be 150 mm (6 in.) to allow for mounting the Main/Echo

Switch.

3. Attach the switch from the bottom with the tapping screws

supplied.

4. Insert the plug of the Leslie speed switch into the LESLIE

SWITCH Jack on the Volume Panel.

5. Affix the wire clamp on the bottom of the organ and affix

the cable.

Attach the Leslie Speed Switch

(USA only)