Operation Manual

ManualsBrandsHammond ManualsAudioC-3 mk2

100

Setting the Parameters

CONTROL

This mode is for setting the Motor Control Switch, Foot Switch and Expression Pedal.

To locate this mode:

Press the [MENU/EXIT] button and display the MENU and select PAGE C by the [PAGE]

button, and then press the [3] CONTROL button.

MOTOR CONTROL SWITCH

1. MOTOR - DOWN (G)

2. MOTOR - UP (G)

This is for setting the time required for the pitch change, when you

operate the [MOTOR CONTROL] Switch.

The setting range is 0.1 - 9.9 seconds.

NOTE: You can locate this page by moving Motor Control switch press-

ing the [MENU/EXIT] button.

3. MOTOR - AMP (G)

This is for setting the motion of the amp when you push the [MO-

TOR CONTROL] switch to “DOWN”.

If you switch ON, the pitch and volume drop together.

FOOT SWITCH

4. FOOT SWITCH - FUNCTION (G)

This is for setting the function of the Foot Switch.

OFFOFF

OFF: Foot Switch is disabled.

LESLIE C/T ALLESLIE C/T AL

LESLIE C/T AL

, MOM, MOM

, MOM:

These are for switching Chorale/Tremolo of the Leslie Ef-

fect. At ALT, Chorale/Tremolo is alternately switched at

each press of the Foot Switch, and switches to Stop if

pressed for longer than 1 second. At MOM, the Leslie effect

switches to Tremolo, as long as the foot switch is de-

pressed, and switches to Chorale when you release it.

SPRINGSPRING

SPRING:

This is for producing the effect of shaking a spring reverb.

DELADELA

DELA

Y TIMEY TIME

Y TIME:

This function sets the delay time (P. 89 #11) of the reverb

effect(if the “delay” setting is selected), by rhythmic tap-

ping the foot-switch. The delay time will be set to the tempo

at which you tap the foot switch. By pressing and holding

the foot-switch, the delay sound will be erased.

REVERB DEPTH:REVERB DEPTH:

REVERB DEPTH:

Changes the Reverb Depth to MAXIMUM while pressing

the Foot Switch regardless of the Reverb parameter set-

ting.

NOTE: You can locate this page by pushing Foot switch while pressing

the [MENU/EXIT] button.

EXPRESSION PEDAL

5. EXPRESSION - MINIMUM LEVEL (G)

Sets the minimum level when the Expression pedal at its “back”

position. The setting range is OFF, -40db to 0db. “OFF” renders

the organ silent, when the Expression is at minimum, “0dB” pro-

duces no reduction in volume.

6. EXPRESSION - LIMIT LF (G)

7. EXPRESSION - LIMIT HF (G)

These are for setting the levels to maintain for low and high fre-

quencies when the Expression is minimum.

The setting range is OFF, -40dB to -5dB. This function does not

work at “OFF”. Otherwise the level is maintained even if the Ex-

pression is minimum.

8. EXPRESSION - CURVE (S)

This is for setting how the value varies corresponding to the de-

pressing angle of the Expression Pedal. 1 - 3 are curves for playing

while sitting on the bench, 4 - 5 are those for the playing while

standing. See the bottom right figure for details.

9. EXPRESSION - MONITOR

Displays the present Expression Value.

NOTE: The parameters by the names with (G) on the tail are for “Glo-

bal”. These parameters will be recorded when set, and are com-

mon in each Combination Preset. (S) is for “System”. These

parameters will be recorded when set, and are common in each

Combination Preset, and it does not save to setup.

Degree

Value

1 2 3

5 6 7 8