User Manual

13
Introduction
REAR PANEL
POWER
󱀼 DC IN jack
Connect the AC adaptor AD3-1250 to this jack.
󱀽 POWER switch
SOUND OUTPUT TERMINALS
󱀾 PHONES jack
Connect stereo headphones here.
Connecting Headphones does NOT mute the Line or Leslie
Outputs.
󱀿 LINE OUT L/MONO jack
󱁀 LINE OUT R jack
 ese are the sound output jacks.
If the connected mixer or monitor speaker is stereophonic, con-
nect both L and R. If monaural, connect only to the L/MONO
terminal (P. 16) and set the Audio Mode at “MONO” (P. 104).
󱁁 LESLIE 8 PIN jack
Connect a Leslie Speaker equipped with an eight-pin jack here.
When the connection of a physical Leslie Speaker is detected,
the on-board digital Leslie Simulator to the PHONES jack
(53) and the LINE OUT jacks (54, 55) are disabled. (P. 17)
CONTROLLER TERMINALS
󱁂 DAMPER PEDAL jack
Connect an optional Damper Pedal (optional FS-9H etc.) here.
If you press the damper pedal, holding down the keyboard, the
sound is sustained even after you release your fi nger from the
key. (P. 78)
󱁃 FOOT SWITCH jack
Connect the Foot Switch (optional FS-9H etc.) here.
Consult (P. 78) to learn the diff erent functions available for the
foot switch.
󱁄 EXP. PEDAL jack
Connect the Expression Pedal (optional EXP-50 etc.) here.
Controls volume while you are playing. (P. 78)
MIDI TERMINALS
󱁅 MIDI OUT jack
MIDI information is output from this jack. (P. 106)
󱁆 MIDI IN jack
MIDI received here. From the factory, this terminal is set to
receive channels in accordance with using a lower manual and
pedalboard. (P. 106)
USB TERMINAL
󱁇 USB FLASH DRIVE jack
 is jack is for connecting a USB Flash drive. (P. 118)
PHONES
USB
FLASH DRIVE
󱀼
󱀽
󱀾󱀿󱁀󱁁󱁂󱁃󱁄󱁅
󱁆
󱁇