User Manual

*#1
Sk1
/
Sk2
Owner’s Manual
76
P A T C H
In this mode you a name your patch, set which parameters load, and how to link to
the Favorite buttons.
To locate this mode:
PATCH NAME
❶ Patch Name (P)
Name the present patch using up to 15 letters.
Move the cursor by the [W][X] buttons.  en select letters
with the [VALUE] knob.
 e patch name is lost, unless you save the patch.
NOTE: This parameter (P) is a patch parameter. It is recorded in each
patch.
 PATCH LOAD
 ese are for setting which parameters are loaded when a patch
is called. Sets whether or not to load:
❷ PATCH LOAD - UPPER Registration (G)
Drawbar registration of the UPPER part.
❸ PATCH LOAD - LOWER/PEDAL Registration (G)
Drawbar registration of the LOWER and PEDAL parts.
❹ PATCH LOAD - DRAWBAR (G)
 e parameters specifi c to the Organ Section such as organ
type or percussion.
❺ PATCH LOAD - EXTRA VOICES (G)
Extra Voice parameters.
❻ PATCH LOAD - INTERNAL ZONE (G)
 e parameters relating with Internal Zone or Coupler (Pedal
to Lower and Manual Bass).
❼ PATCH LOAD - EXTERNAL ZONE (G)
 e parameters specifi c to the External Zone to control exter-
nal MIDI equipment.
❽ PATCH LOAD - DRAWBAR EFFECT (G)
 e parameters specifi c to the Organ Section Eff ects (Over-
drive, Multi-Eff ects, Equalizer).
❾ PATCH LOAD - ANIMATION (G)
 e parameters specifi c to the Leslie, Vibrato & Chorus eff ects.
󱀓 PATCH LOAD - EXTRA VOICE EFFECTS (G)
 e parameters specifi c to the Extra Voice Section Eff ects
(Overdrive, Multi-Eff ects and Equalizer).
󱀔 PATCH LOAD - REVERB (G)
 e Reverb parameters.
NOTE: Each Patch Load parameter is a global parameter. It is record-
ed when the value is set. Common for each patch.
 FAVORITES
󱀕 FAVORITE ACCESS (G)
 is is for setting the action of the Favorite Buttons.
ASSOCIATE:
Each number button usually calls the related patch.
If you touch each number button holding down the [RECORD]
button, it relates the number button to the currently selected
patch.
OVERWRITE:
In addition to above, if you touch each number button holding
down the [RECORD] button, it records the current setting to the
selected patch.
LOCKED1-10:
Each number button usually calls the corresponding patch, 1 ...
10.
If you touch each number button holding down the [RECORD]
button, it records the current setting to the corresponding patch,
1 ... 10.
DIRECT:
This is for directly calling the patch, using each number button.
To call the patch,  rst put in the 3 digit patch number and then
touch the [ENTER] button.
U001 ... [1], [ENTER]
U010 ... [1], [10], [ENTER]
U100 ... [1], [10], [10], [ENTER]
P001 ... [1], [10], [1], [ENTER]
P010 ... [1], [1], [10], [ENTER]
P100 ... [2], [10], [10], [ENTER]
You can not relate the patch to each number button.
󱀖 to 󱀟 FAVORITE PATCHES (G)
Displays and changing the patches related with each Number
button.
You can enter the these page by pressing and hold the [1] - [10]
button also.
NOTE: “G” means “Global”. These parameters will be recorded when
set, and are common in each Patch.
See the “Function mode” (P. 68) for operational details.
MENU/
EXIT
ENTER
❶
❷❸ ❹ ❺ ❻ ❼ ❽❾󱀓
󱀔
󱀕
~ omitted ~
󱀟󱀖