User Manual

*#1
Sk1
/
Sk2
Owner’s Manual
84
LESLIE
In this mode, the settings are made for the built-in Leslie Eff ect and
the External Leslie Speaker.
 ere are many parameters related to the Leslie functions, to make
this easier to edit and use.
 CABINET NUMBER
❶ CABINET NUMBER (P)
Selects the Cabinet Number to use in the Patch.
 e setting range is P1 to P8 (not-overwritable) and U1 to U8 (overwritable). If the
Leslie parameter is changed, “*” is displayed on the left side.
 LESLIE PARAMETERS
❷ CABINET NAME (L)
Sets the Cabinet Name by up to 10 characters.
Move the cursor with the [W][X] button and select letters with the [VALUE] knob.
Allowable values are: symbols, digits and the large and small Alphabet.
 e name and following (L) parameters are not recorded until the Cabinet Macro is
recorded into memory (See the next paragraph.)
❸ AMP (L)
 is is for setting the type of the virtual Power Amplifi er.
Solid: Flat characteristic Amp
Tube: Tube-style amp with Mild characteristics.
❹ SPEAKER (L)
 is is for setting the virtual Speaker.
RotSmall: A small Leslie speaker, such as the Leslie 145
RotLarge: A large Leslie speaker, such as the Leslie 122
Station: A  xed speaker, such as the Hammond PR-40
CONCEPT OF THE CABINET NUMBER
One Cabinet is equivalent to a virtual Leslie speak-
er made with the Leslie parameter.
This is a Patch parameter.
#1
#2
#3
or, keep pressing either of the [BYPASS], [STOP], [FAST] buttons for a few seconds.
See “Function mode” (P. 68) for operation details.
MENU/
EXIT
ENTER
 e built-in Leslie parameters are grouped in macro-settings called
“CABINETS”. You select the CABINET NUMBER in the Com-
bination Presets where this selection is saved as part of the Preset.
To locate this mode:
❶
❷
❸❹
❺❻ ❼ ❽❾ 󱀓 󱀔
󱀕󱀖󱀗 󱀘 󱀙 󱀚
󱀛󱀜
󱀝